[PATCH v4 21/27] ata: move ata_qc_complete_multiple() to libata-sata.c

[Bartlomiej Zolnierkiewicz]

* move ata_qc_complete_multiple() to libata-sata.c

Code size savings on m68k arch using (modified) atari_defconfig:

   text    data     bss     dec     hex filename
before:
  32559     572      40   33171    8193 drivers/ata/libata-core.o
after:
  32162     572      40   32774    8006 drivers/ata/libata-core.o

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@xxxxxxxxxxx>
---
 drivers/ata/libata-core.c | 59 ---------------------------------------
 drivers/ata/libata-sata.c | 59 +++++++++++++++++++++++++++++++++++++++
 include/linux/libata.h    |  2 +-
 3 files changed, 60 insertions(+), 60 deletions(-)

diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 1879072419fe..d246bc1e08c9 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4757,65 +4757,6 @@ u64 ata_qc_get_active(struct ata_port *ap)
 }
 EXPORT_SYMBOL_GPL(ata_qc_get_active);
 
-/**
- *	ata_qc_complete_multiple - Complete multiple qcs successfully
- *	@ap: port in question
- *	@qc_active: new qc_active mask
- *
- *	Complete in-flight commands.  This functions is meant to be
- *	called from low-level driver's interrupt routine to complete
- *	requests normally.  ap->qc_active and @qc_active is compared
- *	and commands are completed accordingly.
- *
- *	Always use this function when completing multiple NCQ commands
- *	from IRQ handlers instead of calling ata_qc_complete()
- *	multiple times to keep IRQ expect status properly in sync.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	Number of completed commands on success, -errno otherwise.
- */
-int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
-{
-	u64 done_mask, ap_qc_active = ap->qc_active;
-	int nr_done = 0;
-
-	/*
-	 * If the internal tag is set on ap->qc_active, then we care about
-	 * bit0 on the passed in qc_active mask. Move that bit up to match
-	 * the internal tag.
-	 */
-	if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
-		qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
-		qc_active ^= qc_active & 0x01;
-	}
-
-	done_mask = ap_qc_active ^ qc_active;
-
-	if (unlikely(done_mask & qc_active)) {
-		ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
-			     ap->qc_active, qc_active);
-		return -EINVAL;
-	}
-
-	while (done_mask) {
-		struct ata_queued_cmd *qc;
-		unsigned int tag = __ffs64(done_mask);
-
-		qc = ata_qc_from_tag(ap, tag);
-		if (qc) {
-			ata_qc_complete(qc);
-			nr_done++;
-		}
-		done_mask &= ~(1ULL << tag);
-	}
-
-	return nr_done;
-}
-EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
-
 /**
  *	ata_qc_issue - issue taskfile to device
  *	@qc: command to issue to device
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index ccd60f71ca31..57344f87b4e0 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -600,6 +600,65 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 }
 EXPORT_SYMBOL_GPL(sata_link_hardreset);
 
+/**
+ *	ata_qc_complete_multiple - Complete multiple qcs successfully
+ *	@ap: port in question
+ *	@qc_active: new qc_active mask
+ *
+ *	Complete in-flight commands.  This functions is meant to be
+ *	called from low-level driver's interrupt routine to complete
+ *	requests normally.  ap->qc_active and @qc_active is compared
+ *	and commands are completed accordingly.
+ *
+ *	Always use this function when completing multiple NCQ commands
+ *	from IRQ handlers instead of calling ata_qc_complete()
+ *	multiple times to keep IRQ expect status properly in sync.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	Number of completed commands on success, -errno otherwise.
+ */
+int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active)
+{
+	u64 done_mask, ap_qc_active = ap->qc_active;
+	int nr_done = 0;
+
+	/*
+	 * If the internal tag is set on ap->qc_active, then we care about
+	 * bit0 on the passed in qc_active mask. Move that bit up to match
+	 * the internal tag.
+	 */
+	if (ap_qc_active & (1ULL << ATA_TAG_INTERNAL)) {
+		qc_active |= (qc_active & 0x01) << ATA_TAG_INTERNAL;
+		qc_active ^= qc_active & 0x01;
+	}
+
+	done_mask = ap_qc_active ^ qc_active;
+
+	if (unlikely(done_mask & qc_active)) {
+		ata_port_err(ap, "illegal qc_active transition (%08llx->%08llx)\n",
+			     ap->qc_active, qc_active);
+		return -EINVAL;
+	}
+
+	while (done_mask) {
+		struct ata_queued_cmd *qc;
+		unsigned int tag = __ffs64(done_mask);
+
+		qc = ata_qc_from_tag(ap, tag);
+		if (qc) {
+			ata_qc_complete(qc);
+			nr_done++;
+		}
+		done_mask &= ~(1ULL << tag);
+	}
+
+	return nr_done;
+}
+EXPORT_SYMBOL_GPL(ata_qc_complete_multiple);
+
 /**
  *	ata_slave_link_init - initialize slave link
  *	@ap: port to initialize slave link for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ecee9544fb86..d9cb7768fb64 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1157,7 +1157,6 @@ extern void ata_id_c_string(const u16 *id, unsigned char *s,
 extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
 					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
-extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
 extern u64 ata_qc_get_active(struct ata_port *ap);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd);
 extern int ata_std_bios_param(struct scsi_device *sdev,
@@ -1234,6 +1233,7 @@ extern int ata_slave_link_init(struct ata_port *ap);
 extern void ata_tf_to_fis(const struct ata_taskfile *tf,
                          u8 pmp, int is_cmd, u8 *fis);
 extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);
+extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active);
 extern bool sata_lpm_ignore_phy_events(struct ata_link *link);
 
 extern int ata_cable_40wire(struct ata_port *ap);
-- 
2.24.1