[PATCH v9 06/11] pwm: imx27: Use 64-bit division macro and function

[Guru Das Srinagesh]

Since the PWM framework is switching struct pwm_state.period's
datatype to u64, prepare for this transition by using
DIV_ROUND_UP_ULL to handle a 64-bit dividend, and div64_u64 to handle a
64-bit divisor.

Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: Anson Huang <Anson.Huang@xxxxxxx>
Cc: Michal VokÃÄ <michal.vokac@xxxxxxxxx>
Cc: Adam Ford <aford173@xxxxxxxxx>
Cc: Mukesh Ojha <mojha@xxxxxxxxxxxxxx>
Cc: Dan Carpenter <dan.carpenter@xxxxxxxxxx>

Signed-off-by: Guru Das Srinagesh <gurus@xxxxxxxxxxxxxx>
---
 drivers/pwm/pwm-imx27.c | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index 35a7ac42..b7d38d0 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -208,7 +208,7 @@ static void pwm_imx27_wait_fifo_slot(struct pwm_chip *chip,
 	sr = readl(imx->mmio_base + MX3_PWMSR);
 	fifoav = FIELD_GET(MX3_PWMSR_FIFOAV, sr);
 	if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
-		period_ms = DIV_ROUND_UP(pwm_get_period(pwm),
+		period_ms = DIV_ROUND_UP_ULL(pwm_get_period(pwm),
 					 NSEC_PER_MSEC);
 		msleep(period_ms);
 
@@ -240,8 +240,7 @@ static int pwm_imx27_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	period_cycles /= prescale;
 	c = (unsigned long long)period_cycles * state->duty_cycle;
-	do_div(c, state->period);
-	duty_cycles = c;
+	duty_cycles = div64_u64(c, state->period);
 
 	/*
 	 * according to imx pwm RM, the real period value should be PERIOD
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project