Re: [PATCH v3 2/3] leds: pwm: add support for default-state device property

[Jacek Anaszewski]

Hi Denis,

On 3/16/20 9:24 PM, Denis Osterland-Heim wrote:
> Hi Jacek,
> 
> Am Montag, den 16.03.2020, 19:36 +0100 schrieb Jacek Anaszewski:
>> Hi Denis,
>>
>> On 3/16/20 1:53 PM, Denis Osterland-Heim wrote:
> ...
>>>  
>>> @@ -92,13 +96,27 @@ static int led_pwm_add(struct device *dev, struct led_pwm_priv *priv,
>>>  
>>>  	pwm_init_state(led_data->pwm, &led_data->pwmstate);
>>>  
>>> +	if (led->default_state == LEDS_PWM_DEFSTATE_ON)
>>> +		led_data->cdev.brightness = led->max_brightness;
>>> +	else if (led->default_state == LEDS_PWM_DEFSTATE_KEEP) {
>>> +		uint64_t brightness;
>>> +
>>> +		pwm_get_state(led_data->pwm, &led_data->pwmstate);
>>
>> This seems to not be reading the device state, i.e. what you tried
>> to address by direct call to pwm->chip->ops->get_state() before.
>>
>> Am I missing something?
>>
> 
> well, not you, but I missed cfc4c189bc70b1acc17e6f1abf1dc1c0ae890bd8.
> Since this commit pwm_get_state() is sufficient.

I assume you tested it?

With that, for the whole set:

Acked-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>

-- 
Best regards,
Jacek Anaszewski