Re: [PATCH] arm64: dts: ti: k3-am65: Add clocks to dwc3 nodes

[Tero Kristo]

On 11/03/2020 16:41, Roger Quadros wrote:
> From: Dave Gerlach <d-gerlach@xxxxxx>
>
> The TI sci-clk driver can scan the DT for all clocks provided by system
> firmware and does this by checking the clocks property of all nodes, so
> we must add this to the dwc3 nodes so USB clocks are available.
>
> Without this USB does not work with latest system firmware i.e.
> [    1.714662] clk: couldn't get parent clock 0 for /interconnect@100000/dwc3@4020000
>
> Fixes: cc54a99464ccd ("arm64: dts: ti: k3-am6: add USB suppor")
> Signed-off-by: Dave Gerlach <d-gerlach@xxxxxx>
> Signed-off-by: Roger Quadros <rogerq@xxxxxx>
> Cc: stable@xxxxxxxxxx
> ---

Queued up towards 5.7, thanks.

-Tero

>   arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 ++
>   1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> index e5df20a2d2f9..d86c5c7b82fc 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
> @@ -296,6 +296,7 @@
>   		interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
>   		dma-coherent;
>   		power-domains = <&k3_pds 151 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
>   		assigned-clocks = <&k3_clks 151 2>, <&k3_clks 151 7>;
>   		assigned-clock-parents = <&k3_clks 151 4>,	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
>   					 <&k3_clks 151 9>;	/* set PIPE3_TXB_CLK to CLK_12M_RC/256 (for HS only) */
> @@ -335,6 +336,7 @@
>   		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
>   		dma-coherent;
>   		power-domains = <&k3_pds 152 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 152 2>;
>   		assigned-clocks = <&k3_clks 152 2>;
>   		assigned-clock-parents = <&k3_clks 152 4>;	/* set REF_CLK to 20MHz i.e. PER0_PLL/48 */
>   

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki