[PATCH v3 06/11] media: adv748x: prepare/enable mclk when the audio is used
From: Alex Riesen
Date: Fri Mar 20 2020 - 12:34:27 EST
As there is nothing else (the consumers are supposed to do that) which
enables the clock, do it in the driver.
Signed-off-by: Alexander Riesen <alexander.riesen@xxxxxxxxxxx>
--
v3: added
---
drivers/media/i2c/adv748x/adv748x-dai.c | 14 +++++++++++++-
1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/drivers/media/i2c/adv748x/adv748x-dai.c b/drivers/media/i2c/adv748x/adv748x-dai.c
index 6fce7d000423..1c673efd4745 100644
--- a/drivers/media/i2c/adv748x/adv748x-dai.c
+++ b/drivers/media/i2c/adv748x/adv748x-dai.c
@@ -117,11 +117,22 @@ static int adv748x_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
static int adv748x_dai_startup(struct snd_pcm_substream *sub, struct snd_soc_dai *dai)
{
+ int ret;
struct adv748x_state *state = state_of(dai);
if (sub->stream != SNDRV_PCM_STREAM_CAPTURE)
return -EINVAL;
- return set_audio_pads_state(state, 1);
+ ret = set_audio_pads_state(state, 1);
+ if (ret)
+ goto fail;
+ ret = clk_prepare_enable(state->dai.mclk);
+ if (ret)
+ goto fail_pwdn;
+ return 0;
+fail_pwdn:
+ set_audio_pads_state(state, 0);
+fail:
+ return ret;
}
static int adv748x_dai_hw_params(struct snd_pcm_substream *sub,
@@ -174,6 +185,7 @@ static void adv748x_dai_shutdown(struct snd_pcm_substream *sub, struct snd_soc_d
{
struct adv748x_state *state = state_of(dai);
+ clk_disable_unprepare(state->dai.mclk);
set_audio_pads_state(state, 0);
}
--
2.25.1.25.g9ecbe7eb18