[PATCH net-next v3 4/7] net: phy: bcm84881: use phy_read_mmd_poll_timeout() to simplify the code

[Dejin Zheng]

use phy_read_mmd_poll_timeout() to replace the poll codes for
simplify the code in bcm84881_wait_init() function.

Signed-off-by: Dejin Zheng <zhengdejin5@xxxxxxxxx>
---
v2 -> v3:
	- adapt to it after modifying the parameter order of the
	  newly added function
v1 -> v2:
	- remove the handle of phy_read_mmd's return error.

 drivers/net/phy/bcm84881.c | 27 ++++-----------------------
 1 file changed, 4 insertions(+), 23 deletions(-)

diff --git a/drivers/net/phy/bcm84881.c b/drivers/net/phy/bcm84881.c
index 14d55a77eb28..b70be775909c 100644
--- a/drivers/net/phy/bcm84881.c
+++ b/drivers/net/phy/bcm84881.c
@@ -22,30 +22,11 @@ enum {
 
 static int bcm84881_wait_init(struct phy_device *phydev)
 {
-	unsigned int tries = 20;
-	int ret, val;
-
-	do {
-		val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1);
-		if (val < 0) {
-			ret = val;
-			break;
-		}
-		if (!(val & MDIO_CTRL1_RESET)) {
-			ret = 0;
-			break;
-		}
-		if (!--tries) {
-			ret = -ETIMEDOUT;
-			break;
-		}
-		msleep(100);
-	} while (1);
+	int val;
 
-	if (ret)
-		phydev_err(phydev, "%s failed: %d\n", __func__, ret);
-
-	return ret;
+	return phy_read_mmd_poll_timeout(phydev, MDIO_MMD_PMAPMD, MDIO_CTRL1,
+					 val, !(val & MDIO_CTRL1_RESET),
+					 100000, 2000000);
 }
 
 static int bcm84881_config_init(struct phy_device *phydev)
-- 
2.25.0