Re: [PATCH v3 09/11] arm64: dts: renesas: salvator: add a connection from adv748x codec (HDMI input) to the R-Car SoC

[Alex Riesen]

Alex Riesen, Mon, Mar 23, 2020 09:40:11 +0100:
> Geert Uytterhoeven, Mon, Mar 23, 2020 09:34:45 +0100:
> > On Fri, Mar 20, 2020 at 5:43 PM Alex Riesen <alexander.riesen@xxxxxxxxxxx> wrote:
> > > As all known variants of the Salvator board have the HDMI decoder
> > > chip (the ADV7482) connected to the SSI4 on R-Car SoC, the ADV7482
> > > endpoint and the connection definitions are placed in the common board
> > > file.
> > > For the same reason, the CLK_C clock line and I2C configuration (similar
> > > to the ak4613, on the same interface) are added into the common file.
> > >
> > > Signed-off-by: Alexander Riesen <alexander.riesen@xxxxxxxxxxx>
> > > Reviewed-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> > 
> > Did I provide a Reviewed-by?
> > 
> > > The driver provides only MCLK clock, not the SCLK and LRCLK,
> > > which are part of the I2S protocol.
> > >
> > > Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> > 
> > Perhaps you mixed it up with Laurent's?
> 
> Sorry. I actually did: he did provded Reviewed-by in his email, and you
> did not. I was ... a little overwhelmed.

It's even worse: even Laurent didn't provide his Reviewed-by for this
particular patch (it was bindings). Corrected.

Regards,
Alex