Re: [PATCH] driver/perf: Add PMU driver for the ARM DMC-620 memory controller.

From: Will Deacon
Date: Wed Apr 01 2020 - 06:27:32 EST


On Wed, Apr 01, 2020 at 10:52:26AM +0100, Mark Rutland wrote:
> On Tue, Mar 31, 2020 at 03:14:59PM -0700, Tuan Phan wrote:
> > > On Mar 20, 2020, at 4:25 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> > > On Thu, Mar 19, 2020 at 12:03:43PM -0700, Tuan Phan wrote:
> > >>> On Mar 19, 2020, at 8:16 AM, Mark Rutland <mark.rutland@xxxxxxx> wrote:
> > >>> On Tue, Mar 17, 2020 at 05:29:38PM -0700, Tuan Phan wrote:
> > >>>> +static int arm_dmc620_pmu_dev_init(struct arm_dmc620_pmu *dmc620_pmu)
> > >>>> +{
> > >>>> + struct platform_device *pdev = dmc620_pmu->pdev;
> > >>>> + int ret;
> > >>>> +
> > >>>> + ret = devm_request_irq(&pdev->dev, dmc620_pmu->irq,
> > >>>> + arm_dmc620_pmu_handle_irq,
> > >>>> + IRQF_SHARED,
> > >>>> + dev_name(&pdev->dev), dmc620_pmu);
> > >>>
> > >>> This should have IRQF_NOBALANCING | IRQF_NO_THREAD. I don't think we
> > >>> should have IRQF_SHARED.
> > >> => I agree on having IRQF_NOBALANCING and IRQF_NO_THREAD. But
> > >> IRQF_SHARED is needed. In our platform all DMC620s share same IRQs and
> > >> any cpus can access the pmu registers.
> > >
> > > Linux needs to ensure that the same instance is concistently accessed
> > > from the same CPU, and needs to migrate the IRQ to handle that. Given we
> > > do that on a per-instance basis, we cannot share the IRQ with another
> > > instance.
> > >
> > > Please feed back to you HW designers that muxing IRQs like this causes
> > > significant problems for software.
> >
> > I looked at the SMMUv3 PMU driver and it also uses IRQF_SHARED. SMMUv3
> > PMU and DMC620 PMU are very much similar in which counters can be
> > accessed by any cores using memory map. Any special reasons
> > IRQF_SHARED works with SMMUv3 PMU driver?
>
> No; I believe that is a bug in the SMMUv3 PMU driver. If the IRQ were
> shared, and another driver that held the IRQ changed the affinity,
> things would go very wrong.

I *think* the idea is that the SMMUv3 PMU driver manages multiple PMCG
devices, which may all share an irq line, rather than the irq line being
shared by some other driver that might change the affinity. So I suspect
dropping IRQF_SHARED will break things.

> Note that it's also missing IRQF_NOBALANCING, which is also necessary to
> avoid such issues.

unsigned long flags = IRQF_NOBALANCING | IRQF_SHARED | IRQF_NO_THREAD;

so it looks like IRQF_NOBALANCING is already taken care of.

Will