[PATCH 4.14 028/148] mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

[Greg Kroah-Hartman]

From: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>

commit 53dd0a7cd65edc83b0c243d1c08377c8b876b2ee upstream.

SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
SAMA5D27 doesn't). Fix this by forcing card-detect in the module
if module-controlled CD is not used.

Fixed commit addresses the problem only for non-removable cards. This
amends it to also cover gpio-cd case.

Cc: stable@xxxxxxxxxxxxxxx
Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>
Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
Link: https://lore.kernel.org/r/8d10950d9940468577daef4772b82a071b204716.1584290561.git.mirq-linux@xxxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 drivers/mmc/host/sdhci-of-at91.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/mmc/host/sdhci-of-at91.c
+++ b/drivers/mmc/host/sdhci-of-at91.c
@@ -125,7 +125,8 @@ static void sdhci_at91_reset(struct sdhc
 {
 	sdhci_reset(host, mask);
 
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 }
 
@@ -404,8 +405,11 @@ static int sdhci_at91_probe(struct platf
 	 * detection procedure using the SDMCC_CD signal is bypassed.
 	 * This bit is reset when a software reset for all command is performed
 	 * so we need to implement our own reset function to set back this bit.
+	 *
+	 * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
 	 */
-	if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
+	    || mmc_gpio_get_cd(host->mmc) >= 0)
 		sdhci_at91_set_force_card_detect(host);
 
 	pm_runtime_put_autosuspend(&pdev->dev);