31.03.2020 13:50, Jiada Wang ÐÐÑÐÑ:I agree, will update with generic descriptions
Add suspend mode support for atmel touchscreen driver
Signed-off-by: Jiada Wang <jiada_wang@xxxxxxxxxx>
---
.../bindings/input/atmel,maxtouch.txt | 9 ++++++++
MAINTAINERS | 1 +
include/dt-bindings/input/atmel_mxt_ts.h | 23 +++++++++++++++++++
3 files changed, 33 insertions(+)
create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h
diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
index c88919480d37..0307e7f7bb43 100644
--- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
+++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
@@ -31,6 +31,15 @@ Optional properties for main touchpad device:
- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
+- atmel,suspend-mode: Select method used to suspend:
+ MXT_SUSPEND_DEEP_SLEEP - use T7 to suspend the device into deep sleep
+ MXT_SUSPEND_T9_CTRL - use T9.CTRL to turn off touch processing
+ MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend
+ Definitions are in <dt-bindings/input/atmel_mxt_ts.h>.
+
+- vdd: Required supply regulator when MXT_SUSPEND_REGULATOR is used to suspend
+- avdd: Required supply regulator when MXT_SUSPEND_REGULATOR is used to suspend
Some of NVIDIA Tegra devices have a VDD regulator in a form of GPIO,
which is turned off by default at a boot time, and thus, the
power-regulator needs to be enabled by the driver at a probe time in
order to power-up the touchscreen.
I think the VDD/AVDD description isn't correct because these are the
essential power regulators, they aren't used only for the suspending.
What about something more generic, like this:
- vdd: phandle to Power supply regulator
- avdd: phandle to Analog Power supply regulator