[PATCH v2 04/16] regmap-irq: make it possible to add irq_chip do a specific device node
From: Michael Walle
Date: Thu Apr 02 2020 - 16:37:24 EST
Add a new function regmap_add_irq_chip_np() with its corresponding
devm_regmap_add_irq_chip_np() variant. Sometimes one want to register
the IRQ domain on a different device node that the one of the regmap
node. For example when using a MFD where there are different interrupt
controllers and particularly for the generic regmap gpio_chip/irq_chip
driver. In this case it is not desireable to have the IRQ domain on
the parent node.
Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
drivers/base/regmap/regmap-irq.c | 84 ++++++++++++++++++++++++++------
include/linux/regmap.h | 10 ++++
2 files changed, 78 insertions(+), 16 deletions(-)
diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index 3d64c9331a82..4340e1d268b6 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -541,8 +541,9 @@ static const struct irq_domain_ops regmap_domain_ops = {
};
/**
- * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ * regmap_add_irq_chip_np() - Use standard regmap IRQ controller handling
*
+ * @np: The device_node where the IRQ domain should be added to.
* @map: The regmap for the device.
* @irq: The IRQ the device uses to signal interrupts.
* @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -556,9 +557,10 @@ static const struct irq_domain_ops regmap_domain_ops = {
* register cache. The chip driver is responsible for restoring the
* register values used by the IRQ controller over suspend and resume.
*/
-int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
- int irq_base, const struct regmap_irq_chip *chip,
- struct regmap_irq_chip_data **data)
+int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq,
+ int irq_flags, int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data *d;
int i;
@@ -769,12 +771,10 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
}
if (irq_base)
- d->domain = irq_domain_add_legacy(map->dev->of_node,
- chip->num_irqs, irq_base, 0,
- ®map_domain_ops, d);
+ d->domain = irq_domain_add_legacy(np, chip->num_irqs, irq_base,
+ 0, ®map_domain_ops, d);
else
- d->domain = irq_domain_add_linear(map->dev->of_node,
- chip->num_irqs,
+ d->domain = irq_domain_add_linear(np, chip->num_irqs,
®map_domain_ops, d);
if (!d->domain) {
dev_err(map->dev, "Failed to create IRQ domain\n");
@@ -808,6 +808,30 @@ int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
kfree(d);
return ret;
}
+EXPORT_SYMBOL_GPL(regmap_add_irq_chip_np);
+
+/**
+ * regmap_add_irq_chip() - Use standard regmap IRQ controller handling
+ *
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts.
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success.
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * This is the same as regmap_add_irq_chip_np, except that the device
+ * node of the regmap is used.
+ */
+int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
+ int irq_base, const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
+{
+ return regmap_add_irq_chip_np(map->dev->of_node, map, irq, irq_flags,
+ irq_base, chip, data);
+}
EXPORT_SYMBOL_GPL(regmap_add_irq_chip);
/**
@@ -875,9 +899,10 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
}
/**
- * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
+ * devm_regmap_add_irq_chip_np() - Resource manager regmap_add_irq_chip_np()
*
* @dev: The device pointer on which irq_chip belongs to.
+ * @np: The device_node where the IRQ domain should be added to.
* @map: The regmap for the device.
* @irq: The IRQ the device uses to signal interrupts
* @irq_flags: The IRQF_ flags to use for the primary interrupt.
@@ -890,10 +915,11 @@ static int devm_regmap_irq_chip_match(struct device *dev, void *res, void *data)
* The ®map_irq_chip_data will be automatically released when the device is
* unbound.
*/
-int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
- int irq_flags, int irq_base,
- const struct regmap_irq_chip *chip,
- struct regmap_irq_chip_data **data)
+int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np,
+ struct regmap *map, int irq, int irq_flags,
+ int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
{
struct regmap_irq_chip_data **ptr, *d;
int ret;
@@ -903,8 +929,8 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
if (!ptr)
return -ENOMEM;
- ret = regmap_add_irq_chip(map, irq, irq_flags, irq_base,
- chip, &d);
+ ret = regmap_add_irq_chip_np(np, map, irq, irq_flags, irq_base,
+ chip, &d);
if (ret < 0) {
devres_free(ptr);
return ret;
@@ -915,6 +941,32 @@ int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
*data = d;
return 0;
}
+EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip_np);
+
+/**
+ * devm_regmap_add_irq_chip() - Resource manager regmap_add_irq_chip()
+ *
+ * @dev: The device pointer on which irq_chip belongs to.
+ * @map: The regmap for the device.
+ * @irq: The IRQ the device uses to signal interrupts
+ * @irq_flags: The IRQF_ flags to use for the primary interrupt.
+ * @irq_base: Allocate at specific IRQ number if irq_base > 0.
+ * @chip: Configuration for the interrupt controller.
+ * @data: Runtime data structure for the controller, allocated on success
+ *
+ * Returns 0 on success or an errno on failure.
+ *
+ * The ®map_irq_chip_data will be automatically released when the device is
+ * unbound.
+ */
+int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
+ int irq_flags, int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data)
+{
+ return devm_regmap_add_irq_chip_np(dev, map->dev->of_node, map, irq,
+ irq_flags, irq_base, chip, data);
+}
EXPORT_SYMBOL_GPL(devm_regmap_add_irq_chip);
/**
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 40b07168fd8e..ae5034b2d7c3 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -21,6 +21,7 @@
struct module;
struct clk;
struct device;
+struct device_node;
struct i2c_client;
struct i3c_device;
struct irq_domain;
@@ -1310,12 +1311,21 @@ struct regmap_irq_chip_data;
int regmap_add_irq_chip(struct regmap *map, int irq, int irq_flags,
int irq_base, const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data);
+int regmap_add_irq_chip_np(struct device_node *np, struct regmap *map, int irq,
+ int irq_flags, int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data);
void regmap_del_irq_chip(int irq, struct regmap_irq_chip_data *data);
int devm_regmap_add_irq_chip(struct device *dev, struct regmap *map, int irq,
int irq_flags, int irq_base,
const struct regmap_irq_chip *chip,
struct regmap_irq_chip_data **data);
+int devm_regmap_add_irq_chip_np(struct device *dev, struct device_node *np,
+ struct regmap *map, int irq, int irq_flags,
+ int irq_base,
+ const struct regmap_irq_chip *chip,
+ struct regmap_irq_chip_data **data);
void devm_regmap_del_irq_chip(struct device *dev, int irq,
struct regmap_irq_chip_data *data);
--
2.20.1