Re: [PATCH 2/2] thermal: mediatek: add tsensor support for MT7622 SoC

[Matthias Brugger]

On 19/03/2020 10:54, Henry Yen wrote:
> This patch adds the support for version 2 thermal system(e.g., MT7622 SoC).
> The changes include the way of reading calibration data, the way of
> converting temperature and hardware initialization specific for version 2
> thermal system.
> 
> Signed-off-by: Henry Yen <henry.yen@xxxxxxxxxxxx>
> ---
>  drivers/thermal/mtk_thermal.c | 100 +++++++++++++++++++++++++++++++++-
>  1 file changed, 98 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 13e17c31ba3b..9e6807f6abd4 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -38,6 +38,7 @@
>  #define TEMP_MONIDET0		0x014
>  #define TEMP_MONIDET1		0x018
>  #define TEMP_MSRCTL0		0x038
> +#define TEMP_MSRCTL1		0x03c
>  #define TEMP_AHBPOLL		0x040
>  #define TEMP_AHBTO		0x044
>  #define TEMP_ADCPNP0		0x048
> @@ -133,6 +134,20 @@
>  #define CALIB_BUF0_O_SLOPE_SIGN_V1(x)	(((x) >> 7) & 0x1)
>  #define CALIB_BUF1_ID_V1(x)		(((x) >> 9) & 0x1)
>  
> +/*
> + * Layout of the fuses providing the calibration data
> + * These macros could be used for MT7622.
> + */
> +#define CALIB_BUF0_ADC_OE_V2(x)		(((x) >> 22) & 0x3ff)
> +#define CALIB_BUF0_ADC_GE_V2(x)		(((x) >> 12) & 0x3ff)
> +#define CALIB_BUF0_DEGC_CALI_V2(x)	(((x) >> 6) & 0x3f)
> +#define CALIB_BUF0_O_SLOPE_V2(x)	(((x) >> 0) & 0x3f)
> +#define CALIB_BUF1_VTS_TS1_V2(x)	(((x) >> 23) & 0x1ff)
> +#define CALIB_BUF1_VTS_TS2_V2(x)	(((x) >> 14) & 0x1ff)
> +#define CALIB_BUF1_VTS_TSABB_V2(x)	(((x) >> 5) & 0x1ff)
> +#define CALIB_BUF1_VALID_V2(x)		(((x) >> 4) & 0x1)
> +#define CALIB_BUF1_O_SLOPE_SIGN_V2(x)	(((x) >> 3) & 0x1)
> +
>  enum {
>  	VTS1,
>  	VTS2,
> @@ -266,8 +281,10 @@ struct mtk_thermal {
>  
>  	/* Calibration values */
>  	s32 adc_ge;
> +	s32 adc_oe;
>  	s32 degc_cali;
>  	s32 o_slope;
> +	s32 o_slope_sign;
>  	s32 vts[MAX_NUM_VTS];
>  
>  	const struct mtk_thermal_data *conf;
> @@ -367,7 +384,9 @@ static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
>  static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
>  
>  static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf);
> +static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf);
>  static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw);
> +static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw);
>  
>  /*
>   * The MT8173 thermal controller has four banks. Each bank can read up to
> @@ -503,8 +522,8 @@ static const struct mtk_thermal_data mt7622_thermal_data = {
>  	.adcpnp = mt7622_adcpnp,
>  	.sensor_mux_values = mt7622_mux_values,
>  	.version = MTK_THERMAL_V2,
> -	.extract = mtk_thermal_extract_efuse_v1,
> -	.convert = raw_to_mcelsius_v1,
> +	.extract = mtk_thermal_extract_efuse_v2,
> +	.convert = raw_to_mcelsius_v2,

Hm, does this mean that patch 1/2 get's fixed here? Please reorganize your
patches so that they are correct in the first place and do not needed to be
fixed in the same series.

Regards,
Matthias

>  };
>  
>  /*
> @@ -566,6 +585,36 @@ static int raw_to_mcelsius_v1(struct mtk_thermal *mt, int sensno, s32 raw)
>  	return mt->degc_cali * 500 - tmp;
>  }
>  
> +static int raw_to_mcelsius_v2(struct mtk_thermal *mt, int sensno, s32 raw)
> +{
> +	s32 format_1 = 0;
> +	s32 format_2 = 0;
> +	s32 g_oe = 1;
> +	s32 g_gain = 1;
> +	s32 g_x_roomt = 0;
> +	s32 tmp = 0;
> +
> +	if (raw == 0)
> +		return 0;
> +
> +	raw &= 0xfff;
> +	g_gain = 10000 + (((mt->adc_ge - 512) * 10000) >> 12);
> +	g_oe = mt->adc_oe - 512;
> +	format_1 = mt->vts[VTS2] + 3105 - g_oe;
> +	format_2 = (mt->degc_cali * 10) >> 1;
> +	g_x_roomt = (((format_1 * 10000) >> 12) * 10000) / g_gain;
> +
> +	tmp = (((((raw - g_oe) * 10000) >> 12) * 10000) / g_gain) - g_x_roomt;
> +	tmp = tmp * 10 * 100 / 11;
> +
> +	if (mt->o_slope_sign == 0)
> +		tmp = tmp / (165 - mt->o_slope);
> +	else
> +		tmp = tmp / (165 + mt->o_slope);
> +
> +	return (format_2 - tmp) * 100;
> +}
> +
>  /**
>   * mtk_thermal_get_bank - get bank
>   * @bank:	The bank
> @@ -831,6 +880,23 @@ static int mtk_thermal_extract_efuse_v1(struct mtk_thermal *mt, u32 *buf)
>  	return 0;
>  }
>  
> +static int mtk_thermal_extract_efuse_v2(struct mtk_thermal *mt, u32 *buf)
> +{
> +	if (!CALIB_BUF1_VALID_V2(buf[1]))
> +		return -EINVAL;
> +
> +	mt->adc_oe = CALIB_BUF0_ADC_OE_V2(buf[0]);
> +	mt->adc_ge = CALIB_BUF0_ADC_GE_V2(buf[0]);
> +	mt->degc_cali = CALIB_BUF0_DEGC_CALI_V2(buf[0]);
> +	mt->o_slope = CALIB_BUF0_O_SLOPE_V2(buf[0]);
> +	mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V2(buf[1]);
> +	mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V2(buf[1]);
> +	mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V2(buf[1]);
> +	mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V2(buf[1]);
> +
> +	return 0;
> +}
> +
>  static int mtk_thermal_get_calibration_data(struct device *dev,
>  					    struct mtk_thermal *mt)
>  {
> @@ -900,6 +966,28 @@ static const struct of_device_id mtk_thermal_of_match[] = {
>  };
>  MODULE_DEVICE_TABLE(of, mtk_thermal_of_match);
>  
> +static void mtk_thermal_turn_on_buffer(void __iomem *apmixed_base)
> +{
> +	int tmp;
> +
> +	tmp = readl(apmixed_base + APMIXED_SYS_TS_CON1);
> +	tmp &= ~(0x37);
> +	tmp |= 0x1;
> +	writel(tmp, apmixed_base + APMIXED_SYS_TS_CON1);
> +	udelay(200);
> +}
> +
> +static void mtk_thermal_release_periodic_ts(struct mtk_thermal *mt,
> +					    void __iomem *auxadc_base)
> +{
> +	int tmp;
> +
> +	writel(0x800, auxadc_base + AUXADC_CON1_SET_V);
> +	writel(0x1, mt->thermal_base + TEMP_MONCTL0);
> +	tmp = readl(mt->thermal_base + TEMP_MSRCTL1);
> +	writel((tmp & (~0x10e)), mt->thermal_base + TEMP_MSRCTL1);
> +}
> +
>  static int mtk_thermal_probe(struct platform_device *pdev)
>  {
>  	int ret, i, ctrl_id;
> @@ -908,6 +996,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  	struct resource *res;
>  	u64 auxadc_phys_base, apmixed_phys_base;
>  	struct thermal_zone_device *tzdev;
> +	void __iomem *apmixed_base, *auxadc_base;
>  
>  	mt = devm_kzalloc(&pdev->dev, sizeof(*mt), GFP_KERNEL);
>  	if (!mt)
> @@ -942,6 +1031,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	}
>  
> +	auxadc_base = of_iomap(auxadc, 0);
>  	auxadc_phys_base = of_get_phys_base(auxadc);
>  
>  	of_node_put(auxadc);
> @@ -957,6 +1047,7 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  		return -ENODEV;
>  	}
>  
> +	apmixed_base = of_iomap(apmixedsys, 0);
>  	apmixed_phys_base = of_get_phys_base(apmixedsys);
>  
>  	of_node_put(apmixedsys);
> @@ -982,6 +1073,11 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>  		goto err_disable_clk_auxadc;
>  	}
>  
> +	if (mt->conf->version == MTK_THERMAL_V2) {
> +		mtk_thermal_turn_on_buffer(apmixed_base);
> +		mtk_thermal_release_periodic_ts(mt, auxadc_base);
> +	}
> +
>  	for (ctrl_id = 0; ctrl_id < mt->conf->num_controller ; ctrl_id++)
>  		for (i = 0; i < mt->conf->num_banks; i++)
>  			mtk_thermal_init_bank(mt, i, apmixed_phys_base,
>