[PATCH 03/11] parport: Use more comon logging styles

From: Sudip Mukherjee
Date: Fri Apr 03 2020 - 09:44:29 EST

Next message: Sudip Mukherjee: "[PATCH 07/11] parport_pc: Convert DPRINTK to pr_debug"
Previous message: Sudip Mukherjee: "[PATCH 08/11] parport: Standardize use of printmode"
In reply to: Sudip Mukherjee: "[PATCH 08/11] parport: Standardize use of printmode"
Next in thread: Sudip Mukherjee: "[PATCH 07/11] parport_pc: Convert DPRINTK to pr_debug"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Joe Perches <joe@xxxxxxxxxxx>

Some of the logging can be poorly formatted because of unexpected
line breaks given printks without KERN_CONT that should be pr_cont.

Miscellanea:

o Remove unnecessary spaces between function name and open parenthesis
o Convert bare printks to pr_<level> where appropriate
o Convert embedded function names to use %s, __func__
o Coalesce formats
o Realign arguments
o Use do {} while (0) in a macro and not a bare if

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
Reviewed-by: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@xxxxxxxxx>
---

Joe has given the rationale to use "KERN_DEBUG" at:
https://lore.kernel.org/lkml/ff833cf6a9a489ff446910c85e2a56ff1c11ccb4.camel@xxxxxxxxxxx/

drivers/parport/parport_gsc.c | 10 ++---
drivers/parport/parport_gsc.h | 21 +++++-----
drivers/parport/parport_ip32.c | 92 ++++++++++++++++++++++--------------------
drivers/parport/parport_pc.c | 62 +++++++++++++---------------
drivers/parport/probe.c | 27 +++++--------
drivers/parport/share.c | 13 +++---
6 files changed, 108 insertions(+), 117 deletions(-)

diff --git a/drivers/parport/parport_gsc.c b/drivers/parport/parport_gsc.c
index 81082d5899b0..cb6a08bee3c7 100644
--- a/drivers/parport/parport_gsc.c
+++ b/drivers/parport/parport_gsc.c
@@ -238,14 +238,14 @@ struct parport *parport_gsc_probe_port(unsigned long base,

priv = kzalloc (sizeof (struct parport_gsc_private), GFP_KERNEL);
if (!priv) {
- printk (KERN_DEBUG "parport (0x%lx): no memory!\n", base);
+ printk(KERN_DEBUG "parport (0x%lx): no memory!\n", base);
return NULL;
}
ops = kmemdup(&parport_gsc_ops, sizeof(struct parport_operations),
GFP_KERNEL);
if (!ops) {
- printk (KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
- base);
+ printk(KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
+ base);
kfree (priv);
return NULL;
}
@@ -359,11 +359,11 @@ static int __init parport_init_chip(struct parisc_device *dev)
if (boot_cpu_data.cpu_type > pcxt && !pdc_add_valid(port+4)) {

/* Initialize bidirectional-mode (0x10) & data-tranfer-mode #1 (0x20) */
- printk("%s: initialize bidirectional-mode.\n", __func__);
+ pr_info("%s: initialize bidirectional-mode\n", __func__);
parport_writeb ( (0x10 + 0x20), port + 4);

} else {
- printk("%s: enhanced parport-modes not supported.\n", __func__);
+ pr_info("%s: enhanced parport-modes not supported\n", __func__);
}

p = parport_gsc_probe_port(port, 0, dev->irq,
diff --git a/drivers/parport/parport_gsc.h b/drivers/parport/parport_gsc.h
index 4c4d3c6cd77e..9301217edf12 100644
--- a/drivers/parport/parport_gsc.h
+++ b/drivers/parport/parport_gsc.h
@@ -71,7 +71,7 @@ struct parport_gsc_private {
static inline void parport_gsc_write_data(struct parport *p, unsigned char d)
{
#ifdef DEBUG_PARPORT
- printk (KERN_DEBUG "parport_gsc_write_data(%p,0x%02x)\n", p, d);
+ printk(KERN_DEBUG "%s(%p,0x%02x)\n", __func__, p, d);
#endif
parport_writeb(d, DATA(p));
}
@@ -80,8 +80,7 @@ static inline unsigned char parport_gsc_read_data(struct parport *p)
{
unsigned char val = parport_readb (DATA (p));
#ifdef DEBUG_PARPORT
- printk (KERN_DEBUG "parport_gsc_read_data(%p) = 0x%02x\n",
- p, val);
+ printk(KERN_DEBUG "%s(%p) = 0x%02x\n", __func__, p, val);
#endif
return val;
}
@@ -95,9 +94,9 @@ static inline unsigned char __parport_gsc_frob_control(struct parport *p,
struct parport_gsc_private *priv = p->physport->private_data;
unsigned char ctr = priv->ctr;
#ifdef DEBUG_PARPORT
- printk (KERN_DEBUG
- "__parport_gsc_frob_control(%02x,%02x): %02x -> %02x\n",
- mask, val, ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
+ printk(KERN_DEBUG "%s(%02x,%02x): %02x -> %02x\n",
+ __func__, mask, val,
+ ctr, ((ctr & ~mask) ^ val) & priv->ctr_writable);
#endif
ctr = (ctr & ~mask) ^ val;
ctr &= priv->ctr_writable; /* only write writable bits. */
@@ -126,8 +125,8 @@ static inline void parport_gsc_write_control(struct parport *p,

/* Take this out when drivers have adapted to newer interface. */
if (d & 0x20) {
- printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
- p->name, p->cad->name);
+ printk(KERN_DEBUG "%s (%s): use data_reverse for this!\n",
+ p->name, p->cad->name);
parport_gsc_data_reverse (p);
}

@@ -155,9 +154,9 @@ static inline unsigned char parport_gsc_frob_control(struct parport *p,

/* Take this out when drivers have adapted to newer interface. */
if (mask & 0x20) {
- printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
- p->name, p->cad->name,
- (val & 0x20) ? "reverse" : "forward");
+ printk(KERN_DEBUG "%s (%s): use data_%s for this!\n",
+ p->name, p->cad->name,
+ (val & 0x20) ? "reverse" : "forward");
if (val & 0x20)
parport_gsc_data_reverse (p);
else
diff --git a/drivers/parport/parport_ip32.c b/drivers/parport/parport_ip32.c
index 4f76e4f4f6cf..48b084e86dc6 100644
--- a/drivers/parport/parport_ip32.c
+++ b/drivers/parport/parport_ip32.c
@@ -328,19 +328,19 @@ static void parport_ip32_dump_state(struct parport *p, char *str,
"TST", "CFG"};
unsigned int ecr = readb(priv->regs.ecr);
printk(KERN_DEBUG PPIP32 " ecr=0x%02x", ecr);
- printk(" %s",
- ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
+ pr_cont(" %s",
+ ecr_modes[(ecr & ECR_MODE_MASK) >> ECR_MODE_SHIFT]);
if (ecr & ECR_nERRINTR)
- printk(",nErrIntrEn");
+ pr_cont(",nErrIntrEn");
if (ecr & ECR_DMAEN)
- printk(",dmaEn");
+ pr_cont(",dmaEn");
if (ecr & ECR_SERVINTR)
- printk(",serviceIntr");
+ pr_cont(",serviceIntr");
if (ecr & ECR_F_FULL)
- printk(",f_full");
+ pr_cont(",f_full");
if (ecr & ECR_F_EMPTY)
- printk(",f_empty");
- printk("\n");
+ pr_cont(",f_empty");
+ pr_cont("\n");
}
if (show_ecp_config) {
unsigned int oecr, cnfgA, cnfgB;
@@ -352,52 +352,53 @@ static void parport_ip32_dump_state(struct parport *p, char *str,
writeb(ECR_MODE_PS2, priv->regs.ecr);
writeb(oecr, priv->regs.ecr);
printk(KERN_DEBUG PPIP32 " cnfgA=0x%02x", cnfgA);
- printk(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
+ pr_cont(" ISA-%s", (cnfgA & CNFGA_IRQ) ? "Level" : "Pulses");
switch (cnfgA & CNFGA_ID_MASK) {
case CNFGA_ID_8:
- printk(",8 bits");
+ pr_cont(",8 bits");
break;
case CNFGA_ID_16:
- printk(",16 bits");
+ pr_cont(",16 bits");
break;
case CNFGA_ID_32:
- printk(",32 bits");
+ pr_cont(",32 bits");
break;
default:
- printk(",unknown ID");
+ pr_cont(",unknown ID");
break;
}
if (!(cnfgA & CNFGA_nBYTEINTRANS))
- printk(",ByteInTrans");
+ pr_cont(",ByteInTrans");
if ((cnfgA & CNFGA_ID_MASK) != CNFGA_ID_8)
- printk(",%d byte%s left", cnfgA & CNFGA_PWORDLEFT,
- ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
- printk("\n");
+ pr_cont(",%d byte%s left",
+ cnfgA & CNFGA_PWORDLEFT,
+ ((cnfgA & CNFGA_PWORDLEFT) > 1) ? "s" : "");
+ pr_cont("\n");
printk(KERN_DEBUG PPIP32 " cnfgB=0x%02x", cnfgB);
- printk(" irq=%u,dma=%u",
- (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
- (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
- printk(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
+ pr_cont(" irq=%u,dma=%u",
+ (cnfgB & CNFGB_IRQ_MASK) >> CNFGB_IRQ_SHIFT,
+ (cnfgB & CNFGB_DMA_MASK) >> CNFGB_DMA_SHIFT);
+ pr_cont(",intrValue=%d", !!(cnfgB & CNFGB_INTRVAL));
if (cnfgB & CNFGB_COMPRESS)
- printk(",compress");
- printk("\n");
+ pr_cont(",compress");
+ pr_cont("\n");
}
for (i = 0; i < 2; i++) {
unsigned int dcr = i ? priv->dcr_cache : readb(priv->regs.dcr);
printk(KERN_DEBUG PPIP32 " dcr(%s)=0x%02x",
i ? "soft" : "hard", dcr);
- printk(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
+ pr_cont(" %s", (dcr & DCR_DIR) ? "rev" : "fwd");
if (dcr & DCR_IRQ)
- printk(",ackIntEn");
+ pr_cont(",ackIntEn");
if (!(dcr & DCR_SELECT))
- printk(",nSelectIn");
+ pr_cont(",nSelectIn");
if (dcr & DCR_nINIT)
- printk(",nInit");
+ pr_cont(",nInit");
if (!(dcr & DCR_AUTOFD))
- printk(",nAutoFD");
+ pr_cont(",nAutoFD");
if (!(dcr & DCR_STROBE))
- printk(",nStrobe");
- printk("\n");
+ pr_cont(",nStrobe");
+ pr_cont("\n");
}
#define sep (f++ ? ',' : ' ')
{
@@ -405,20 +406,20 @@ static void parport_ip32_dump_state(struct parport *p, char *str,
unsigned int dsr = readb(priv->regs.dsr);
printk(KERN_DEBUG PPIP32 " dsr=0x%02x", dsr);
if (!(dsr & DSR_nBUSY))
- printk("%cBusy", sep);
+ pr_cont("%cBusy", sep);
if (dsr & DSR_nACK)
- printk("%cnAck", sep);
+ pr_cont("%cnAck", sep);
if (dsr & DSR_PERROR)
- printk("%cPError", sep);
+ pr_cont("%cPError", sep);
if (dsr & DSR_SELECT)
- printk("%cSelect", sep);
+ pr_cont("%cSelect", sep);
if (dsr & DSR_nFAULT)
- printk("%cnFault", sep);
+ pr_cont("%cnFault", sep);
if (!(dsr & DSR_nPRINT))
- printk("%c(Print)", sep);
+ pr_cont("%c(Print)", sep);
if (dsr & DSR_TIMEOUT)
- printk("%cTimeout", sep);
- printk("\n");
+ pr_cont("%cTimeout", sep);
+ pr_cont("\n");
}
#undef sep
}
@@ -1703,7 +1704,7 @@ static size_t parport_ip32_ecp_write_data(struct parport *p,

/* Event 49: PError goes high. */
if (parport_wait_peripheral(p, DSR_PERROR, DSR_PERROR)) {
- printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s",
+ printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s\n",
p->name, __func__);
physport->ieee1284.phase = IEEE1284_PH_ECP_DIR_UNKNOWN;
return 0;
@@ -2132,10 +2133,13 @@ static __init struct parport *parport_ip32_probe_port(void)
/* Print out what we found */
pr_info("%s: SGI IP32 at 0x%lx (0x%lx)", p->name, p->base, p->base_hi);
if (p->irq != PARPORT_IRQ_NONE)
- printk(", irq %d", p->irq);
- printk(" [");
-#define printmode(x) if (p->modes & PARPORT_MODE_##x) \
- printk("%s%s", f++ ? "," : "", #x)
+ pr_cont(", irq %d", p->irq);
+ pr_cont(" [");
+#define printmode(x) \
+do { \
+ if (p->modes & PARPORT_MODE_##x) \
+ pr_cont("%s%s", f++ ? "," : "", #x); \
+} while (0)
{
unsigned int f = 0;
printmode(PCSPP);
@@ -2146,7 +2150,7 @@ static __init struct parport *parport_ip32_probe_port(void)
printmode(DMA);
}
#undef printmode
- printk("]\n");
+ pr_cont("]\n");

parport_announce_port(p);
return p;
diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c
index 2872c6756489..ab3b04f32815 100644
--- a/drivers/parport/parport_pc.c
+++ b/drivers/parport/parport_pc.c
@@ -298,8 +298,8 @@ static size_t parport_pc_epp_read_data(struct parport *port, void *buf,
status = inb(STATUS(port));
if (status & 0x01) {
/* EPP timeout should never occur... */
- printk(KERN_DEBUG
-"%s: EPP timeout occurred while talking to w91284pic (should not have done)\n", port->name);
+ printk(KERN_DEBUG "%s: EPP timeout occurred while talking to w91284pic (should not have done)\n",
+ port->name);
clear_epp_timeout(port);
}
}
@@ -727,7 +727,7 @@ static size_t parport_pc_compat_write_block_pio(struct parport *port,
r = change_mode(port, ECR_PPF); /* Parallel port FIFO */
if (r)
printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
- port->name);
+ port->name);

port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;

@@ -770,9 +770,8 @@ static size_t parport_pc_compat_write_block_pio(struct parport *port,
PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY);
if (r)
- printk(KERN_DEBUG
- "%s: BUSY timeout (%d) in compat_write_block_pio\n",
- port->name, r);
+ printk(KERN_DEBUG "%s: BUSY timeout (%d) in compat_write_block_pio\n",
+ port->name, r);

port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;

@@ -810,8 +809,8 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r) {
- printk(KERN_DEBUG "%s: PError timeout (%d) "
- "in ecp_write_block_pio\n", port->name, r);
+ printk(KERN_DEBUG "%s: PError timeout (%d) in ecp_write_block_pio\n",
+ port->name, r);
}
}

@@ -824,7 +823,7 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
r = change_mode(port, ECR_ECP); /* ECP FIFO */
if (r)
printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
- port->name);
+ port->name);
port->physport->ieee1284.phase = IEEE1284_PH_FWD_DATA;

/* Write the data to the FIFO. */
@@ -867,8 +866,8 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
parport_frob_control(port, PARPORT_CONTROL_INIT, 0);
r = parport_wait_peripheral(port, PARPORT_STATUS_PAPEROUT, 0);
if (r)
- printk(KERN_DEBUG "%s: PE,1 timeout (%d) "
- "in ecp_write_block_pio\n", port->name, r);
+ printk(KERN_DEBUG "%s: PE,1 timeout (%d) in ecp_write_block_pio\n",
+ port->name, r);

parport_frob_control(port,
PARPORT_CONTROL_INIT,
@@ -877,17 +876,16 @@ static size_t parport_pc_ecp_write_block_pio(struct parport *port,
PARPORT_STATUS_PAPEROUT,
PARPORT_STATUS_PAPEROUT);
if (r)
- printk(KERN_DEBUG "%s: PE,2 timeout (%d) "
- "in ecp_write_block_pio\n", port->name, r);
+ printk(KERN_DEBUG "%s: PE,2 timeout (%d) in ecp_write_block_pio\n",
+ port->name, r);
}

r = parport_wait_peripheral(port,
PARPORT_STATUS_BUSY,
PARPORT_STATUS_BUSY);
if (r)
- printk(KERN_DEBUG
- "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
- port->name, r);
+ printk(KERN_DEBUG "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
+ port->name, r);

port->physport->ieee1284.phase = IEEE1284_PH_FWD_IDLE;

@@ -1611,7 +1609,7 @@ static int parport_ECP_supported(struct parport *pb)
if (i <= priv->fifo_depth) {
if (verbose_probing)
printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
- pb->base, i);
+ pb->base, i);
} else
/* Number of bytes we know we can write if we get an
interrupt. */
@@ -1664,14 +1662,14 @@ static int parport_ECP_supported(struct parport *pb)

if (verbose_probing) {
printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
- pb->base, 8 * pword);
+ pb->base, 8 * pword);

- printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n", pb->base,
- config & 0x80 ? "Level" : "Pulses");
+ printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n",
+ pb->base, config & 0x80 ? "Level" : "Pulses");

configb = inb(CONFIGB(pb));
printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
- pb->base, config, configb);
+ pb->base, config, configb);
printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
if ((configb >> 3) & 0x07)
pr_cont("%d", intrline[(configb >> 3) & 0x07]);
@@ -2453,8 +2451,7 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
have_epp = 1;
break;
default:
- printk(KERN_DEBUG
- "parport_pc: probing current configuration\n");
+ printk(KERN_DEBUG "parport_pc: probing current configuration\n");
siofunc = VIA_FUNCTION_PROBE;
break;
}
@@ -2490,12 +2487,11 @@ static int sio_via_probe(struct pci_dev *pdev, int autoirq, int autodma,
port1 = inb(VIA_CONFIG_DATA) << 2;

printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
- port1);
+ port1);
if (port1 == 0x3BC && have_epp) {
outb(via->viacfg_parport_base, VIA_CONFIG_INDEX);
outb((0x378 >> 2), VIA_CONFIG_DATA);
- printk(KERN_DEBUG
- "parport_pc: Parallel port base changed to 0x378\n");
+ printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
port1 = 0x378;
}

@@ -2834,14 +2830,12 @@ static int parport_pc_pci_probe(struct pci_dev *dev,
/* TODO: test if sharing interrupts works */
irq = dev->irq;
if (irq == IRQ_NONE) {
- printk(KERN_DEBUG
- "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
- id->vendor, id->device, io_lo, io_hi);
+ printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
+ id->vendor, id->device, io_lo, io_hi);
irq = PARPORT_IRQ_NONE;
} else {
- printk(KERN_DEBUG
- "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
- id->vendor, id->device, io_lo, io_hi, irq);
+ printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
+ id->vendor, id->device, io_lo, io_hi, irq);
}
data->ports[count] =
parport_pc_probe_port(io_lo, io_hi, irq,
@@ -3113,8 +3107,8 @@ static int __init parport_parse_dma(const char *dmastr, int *val)
#ifdef CONFIG_PCI
static int __init parport_init_mode_setup(char *str)
{
- printk(KERN_DEBUG
- "parport_pc.c: Specified parameter parport_init_mode=%s\n", str);
+ printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n",
+ str);

if (!strcmp(str, "spp"))
parport_init_mode = 1;
diff --git a/drivers/parport/probe.c b/drivers/parport/probe.c
index 10ed0d174080..7e6d713fa5ac 100644
--- a/drivers/parport/probe.c
+++ b/drivers/parport/probe.c
@@ -41,13 +41,13 @@ static void pretty_print(struct parport *port, int device)
pr_info("%s", port->name);

if (device >= 0)
- printk (" (addr %d)", device);
+ pr_cont(" (addr %d)", device);

- printk (": %s", classes[info->class].descr);
+ pr_cont(": %s", classes[info->class].descr);
if (info->class)
- printk(", %s %s", info->mfr, info->model);
+ pr_cont(", %s %s", info->mfr, info->model);

- printk("\n");
+ pr_cont("\n");
}

static void parse_data(struct parport *port, int device, char *str)
@@ -178,9 +178,8 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
* just return constant nibble forever. This catches
* also those cases. */
if (idlens[0] == 0 || idlens[0] > 0xFFF) {
- printk (KERN_DEBUG "%s: reported broken Device ID"
- " length of %#zX bytes\n",
- port->name, idlens[0]);
+ printk(KERN_DEBUG "%s: reported broken Device ID length of %#zX bytes\n",
+ port->name, idlens[0]);
return -EIO;
}
numidlens = 2;
@@ -202,10 +201,8 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,

if (port->physport->ieee1284.phase != IEEE1284_PH_HBUSY_DAVAIL) {
if (belen != len) {
- printk (KERN_DEBUG "%s: Device ID was %zd bytes"
- " while device told it would be %d"
- " bytes\n",
- port->name, len, belen);
+ printk(KERN_DEBUG "%s: Device ID was %zd bytes while device told it would be %d bytes\n",
+ port->name, len, belen);
}
goto done;
}
@@ -215,11 +212,9 @@ static ssize_t parport_read_device_id (struct parport *port, char *buffer,
* the first 256 bytes or so that we must have read so
* far. */
if (buffer[len-1] == ';') {
- printk (KERN_DEBUG "%s: Device ID reading stopped"
- " before device told data not available. "
- "Current idlen %u of %u, len bytes %02X %02X\n",
- port->name, current_idlen, numidlens,
- length[0], length[1]);
+ printk(KERN_DEBUG "%s: Device ID reading stopped before device told data not available. Current idlen %u of %u, len bytes %02X %02X\n",
+ port->name, current_idlen, numidlens,
+ length[0], length[1]);
goto done;
}
}
diff --git a/drivers/parport/share.c b/drivers/parport/share.c
index b0f4513251ee..3169feebdc19 100644
--- a/drivers/parport/share.c
+++ b/drivers/parport/share.c
@@ -720,8 +720,7 @@ parport_register_device(struct parport *port, const char *name,

if (port->physport->flags & PARPORT_FLAG_EXCL) {
/* An exclusive device is registered. */
- printk(KERN_DEBUG "%s: no more devices allowed\n",
- port->name);
+ printk(KERN_DEBUG "%s: no more devices allowed\n", port->name);
return NULL;
}

@@ -789,9 +788,8 @@ parport_register_device(struct parport *port, const char *name,
if (flags & PARPORT_DEV_EXCL) {
if (port->physport->devices) {
spin_unlock(&port->physport->pardevice_lock);
- printk(KERN_DEBUG
- "%s: cannot grant exclusive access for device %s\n",
- port->name, name);
+ printk(KERN_DEBUG "%s: cannot grant exclusive access for device %s\n",
+ port->name, name);
goto out_free_all;
}
port->flags |= PARPORT_FLAG_EXCL;
@@ -1259,7 +1257,8 @@ int parport_claim_or_block(struct pardevice *dev)
r = parport_claim(dev);
if (r == -EAGAIN) {
#ifdef PARPORT_DEBUG_SHARING
- printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n", dev->name);
+ printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n",
+ dev->name);
#endif
/*
* FIXME!!! Use the proper locking for dev->waiting,
@@ -1292,7 +1291,7 @@ int parport_claim_or_block(struct pardevice *dev)
if (dev->port->physport->cad != dev)
printk(KERN_DEBUG "%s: exiting parport_claim_or_block but %s owns port!\n",
dev->name, dev->port->physport->cad ?
- dev->port->physport->cad->name:"nobody");
+ dev->port->physport->cad->name : "nobody");
#endif
}
dev->waiting = 0;
--
2.11.0

Next message: Sudip Mukherjee: "[PATCH 07/11] parport_pc: Convert DPRINTK to pr_debug"
Previous message: Sudip Mukherjee: "[PATCH 08/11] parport: Standardize use of printmode"
In reply to: Sudip Mukherjee: "[PATCH 08/11] parport: Standardize use of printmode"
Next in thread: Sudip Mukherjee: "[PATCH 07/11] parport_pc: Convert DPRINTK to pr_debug"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]