Re: [PATCH net 2/2] net: ethernet: mediatek: move mt7623 settings out off the mt7530

From: Renà van Dorst
Date: Sat Apr 04 2020 - 08:19:59 EST

Hi Sean,

See comments below.

Quoting sean.wang@xxxxxxxxxxxx:

From: Renà van Dorst <opensource@xxxxxxxxxx>

Moving mt7623 logic out off mt7530, is required to make hardware setting
consistent after we introduce phylink to mtk driver.

Fixes: b8fc9f30821e ("net: ethernet: mediatek: Add basic PHYLINK support")
Reviewed-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Tested-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
Signed-off-by: Renà van Dorst <opensource@xxxxxxxxxx>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 43 ++++++++++++++++++---
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 ++++
2 files changed, 45 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 8d28f90acfe7..14da599664e6 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -65,6 +65,17 @@ u32 mtk_r32(struct mtk_eth *eth, unsigned reg)
return __raw_readl(eth->base + reg);
}

+u32 mtk_m32(struct mtk_eth *eth, u32 mask, u32 set, unsigned reg)
+{
+ u32 val;
+
+ val = mtk_r32(eth, reg);
+ val &= ~mask;
+ val |= set;
+ mtk_w32(eth, val, reg);
+ return reg;
+}
+
static int mtk_mdio_busy_wait(struct mtk_eth *eth)
{
unsigned long t_start = jiffies;
@@ -160,11 +171,21 @@ static int mt7621_gmac0_rgmii_adjust(struct mtk_eth *eth,
return 0;
}

-static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth, int speed)
+static void mtk_gmac0_rgmii_adjust(struct mtk_eth *eth,
+ phy_interface_t interface, int speed)
{
u32 val;
int ret;

+ if (interface == PHY_INTERFACE_MODE_TRGMII) {
+ mtk_w32(eth, TRGMII_MODE, INTF_MODE);
+ val = 500000000;
+ ret = clk_set_rate(eth->clks[MTK_CLK_TRGPLL], val);
+ if (ret)
+ dev_err(eth->dev, "Failed to set trgmii pll: %d\n", ret);
+ return;
+ }
+
val = (speed == SPEED_1000) ?
INTF_MODE_RGMII_1000 : INTF_MODE_RGMII_10_100;
mtk_w32(eth, val, INTF_MODE);
@@ -193,7 +214,7 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
struct mtk_eth *eth = mac->hw;
- u32 mcr_cur, mcr_new, sid;
+ u32 mcr_cur, mcr_new, sid, i;
int val, ge_mode, err;

/* MT76x8 has no hardware settings between for the MAC */
@@ -251,10 +272,20 @@ static void mtk_mac_config(struct phylink_config *config, unsigned int mode,
state->interface))
goto err_phy;
} else {
- if (state->interface !=
- PHY_INTERFACE_MODE_TRGMII)
- mtk_gmac0_rgmii_adjust(mac->hw,
- state->speed);
+ mtk_gmac0_rgmii_adjust(mac->hw,
+ state->interface,
+ state->speed);
+

As I tried to explain in my email of 27 March.

mtk_gmac0_rgmii_adjust() needs to be modified or split-up!
Russell King pointed out that mtk_gmac0_rgmii_adjust() is using state->speed
variable. This variable may has not the right value so it should not be used
here. Also mtk_gmac0_rgmii_adjust() is only called on a state->interface change
not state->speed change.

So can we make this function only dependend on the state->interface and how?

I think in both cases, remove mtk_gmac0_rgmii_adjust() changes in this patch and
create a separet patch to fix mtk_gmac0_rgmii_adjust() issue. Would be great if
that also complies to the latest PHYLINK api [1]. So that functions that using
state->speed and other related parameters move to mac_link_up(). Similair also
on the mt7530 switch driver [2].

Greats,

RenÃ

[1]: https://lore.kernel.org/linux-arm-kernel/20200217172242.GZ25745@xxxxxxxxxxxxxxxxxxxxx/
[2]: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=1d01145fd659f9f96ede1c34e3bea0ccb558a293

+ /* mt7623_pad_clk_setup */
+ for (i = 0 ; i < NUM_TRGMII_CTRL; i++)
+ mtk_w32(mac->hw,
+ TD_DM_DRVP(8) | TD_DM_DRVN(8),
+ TRGMII_TD_ODT(i));
+
+ /* Assert/release MT7623 RXC reset */
+ mtk_m32(mac->hw, 0, RXC_RST | RXC_DQSISEL,
+ TRGMII_RCK_CTRL);
+ mtk_m32(mac->hw, RXC_RST, 0, TRGMII_RCK_CTRL);
}
}

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 85830fe14a1b..454cfcd465fd 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -352,10 +352,13 @@
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
+#define RXC_RST BIT(31)
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)

+#define NUM_TRGMII_CTRL 5
+
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
@@ -363,6 +366,11 @@
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))

+/* TRGMII TX Drive Strength */
+#define TRGMII_TD_ODT(i) (0x10354 + 8 * (i))
+#define TD_DM_DRVP(x) ((x) & 0xf)
+#define TD_DM_DRVN(x) (((x) & 0xf) << 4)
+
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
--
2.25.1