[PATCH] Revert "mtd: spi-nor: Add 4B_OPCODES flag to w25q256"

[Chuanhong Guo]

This reverts commit 10050a02f7d508fa88f70fcfceefbacd13488ca7.

Winbond W25Q256FV and W25Q256JV both uses 0xef4019 as JEDEC ID,
but only the latter has proper 4B_OPCODES support.
W25Q256FV has all 4B read instructions but it lacks a 4B page program
instruction, causing the entire flash to be read-only.
Disable 4B_OPCODES for W25Q256 completely.
Users can use broken-flash-reset as a temporary workaround.

Signed-off-by: Chuanhong Guo <gch981213@xxxxxxxxx>
---
"line over 80 characters" warning produced by checkpatch.pl isn't
fixed because I think a revert commit should bring a file back to
what it was before.
I don't have a w25q256jv available and can't compare SFDP table
to create a fix similar to mx25l25635 one.

 drivers/mtd/spi-nor/winbond.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 17deabad57e1..9673ec7fa003 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -52,9 +52,7 @@ static const struct flash_info winbond_parts[] = {
 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512,
-			  SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-			  SPI_NOR_4B_OPCODES) },
+	{ "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "w25q256jvm", INFO(0xef7019, 0, 64 * 1024, 512,
 			     SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
 	{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512,
-- 
2.25.1