Re: [PATCH v4 4/4] drm/mediatek: config mipitx impedance with calibration data

[Chun-Kuang Hu]

Hi, Jitao:

Jitao Shi <jitao.shi@xxxxxxxxxxxx> æ 2020å3æ31æ éä äå4:28åéï
>
> Read calibration data from nvmem, and config mipitx impedance with
> calibration data to make sure their impedance are 100ohm.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
>  drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c | 57 +++++++++++++++++++
>  1 file changed, 57 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> index e4cc967750cb..0f87cd3d1d7d 100644
> --- a/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> +++ b/drivers/gpu/drm/mediatek/mtk_mt8183_mipi_tx.c
> @@ -5,6 +5,8 @@
>   */
>
>  #include "mtk_mipi_tx.h"
> +#include <linux/nvmem-consumer.h>
> +#include <linux/slab.h>
>
>  #define MIPITX_LANE_CON                0x000c
>  #define RG_DSI_CPHY_T1DRV_EN           BIT(0)
> @@ -28,6 +30,7 @@
>  #define MIPITX_PLL_CON4                0x003c
>  #define RG_DSI_PLL_IBIAS               (3 << 10)
>
> +#define MIPITX_D2P_RTCODE      0x0100
>  #define MIPITX_D2_SW_CTL_EN    0x0144
>  #define MIPITX_D0_SW_CTL_EN    0x0244
>  #define MIPITX_CK_CKMODE_EN    0x0328
> @@ -108,6 +111,58 @@ static const struct clk_ops mtk_mipi_tx_pll_ops = {
>         .recalc_rate = mtk_mipi_tx_pll_recalc_rate,
>  };
>
> +static void mtk_mipi_tx_config_calibration_data(struct mtk_mipi_tx *mipi_tx)
> +{
> +       u32 *buf;
> +       u32 rt_code[5];
> +       int i, j;
> +       struct nvmem_cell *cell;
> +       struct device *dev = mipi_tx->dev;
> +       size_t len;
> +
> +       cell = nvmem_cell_get(dev, "calibration-data");
> +       if (IS_ERR(cell)) {
> +               dev_info(dev, "nvmem_cell_get fail\n");
> +               return;
> +       }
> +
> +       buf = (u32 *)nvmem_cell_read(cell, &len);
> +
> +       nvmem_cell_put(cell);
> +
> +       if (IS_ERR(buf)) {
> +               dev_info(dev, "can't get data\n");
> +               return;
> +       }
> +
> +       if (len < 3 * sizeof(u32)) {
> +               dev_info(dev, "invalid calibration data\n");
> +               kfree(buf);
> +               return;
> +       }
> +
> +       rt_code[0] = ((buf[0] >> 6 & 0x1f) << 5) | (buf[0] >> 11 & 0x1f);
> +       rt_code[1] = ((buf[1] >> 27 & 0x1f) << 5) | (buf[0] >> 1 & 0x1f);
> +       rt_code[2] = ((buf[1] >> 17 & 0x1f) << 5) | (buf[1] >> 22 & 0x1f);
> +       rt_code[3] = ((buf[1] >> 7 & 0x1f) << 5) | (buf[1] >> 12 & 0x1f);
> +       rt_code[4] = ((buf[2] >> 27 & 0x1f) << 5) | (buf[1] >> 2 & 0x1f);

Why not just save rt_code in nvmem and you don't need to translate here?
If you need to do so, please add description for this.

Regards,
Chun-Kuang.


> +
> +       for (i = 0; i < 5; i++) {
> +               if ((rt_code[i] & 0x1f) == 0)
> +                       rt_code[i] |= 0x10;
> +
> +               if ((rt_code[i] >> 5 & 0x1f) == 0)
> +                       rt_code[i] |= 0x10 << 5;
> +
> +               for (j = 0; j < 10; j++)
> +                       mtk_mipi_tx_update_bits(mipi_tx,
> +                               MIPITX_D2P_RTCODE * (i + 1) + j * 4,
> +                               1, rt_code[i] >> j & 1);
> +       }
> +
> +       kfree(buf);
> +}
> +
>  static void mtk_mipi_tx_power_on_signal(struct phy *phy)
>  {
>         struct mtk_mipi_tx *mipi_tx = phy_get_drvdata(phy);
> @@ -130,6 +185,8 @@ static void mtk_mipi_tx_power_on_signal(struct phy *phy)
>                                 RG_DSI_HSTX_LDO_REF_SEL,
>                                 (mipi_tx->mipitx_drive - 3000) / 200 << 6);
>
> +       mtk_mipi_tx_config_calibration_data(mipi_tx);
> +
>         mtk_mipi_tx_set_bits(mipi_tx, MIPITX_CK_CKMODE_EN, DSI_CK_CKMODE_EN);
>  }
>
> --
> 2.21.0
> _______________________________________________
> dri-devel mailing list
> dri-devel@xxxxxxxxxxxxxxxxxxxxx
> https://lists.freedesktop.org/mailman/listinfo/dri-devel