Re: [PATCH v8 0/2] iio: proximity: driver for vcnl3020
From: Andy Shevchenko
Date: Mon Apr 06 2020 - 13:53:25 EST
On Mon, Apr 6, 2020 at 8:19 PM Ivan Mikhaylov <i.mikhaylov@xxxxxxxxx> wrote:
>
> Add proximity sensor driver for Vishay vcnl3020. Only on-demand
> measurement is supported for now.
>
Thank you!
> Changes from v7:
> 1. forgot to add Reviewed-by tag.
>
> Changes from v6:
> 1. minor changes
> 1.1 remove VCNL_DRV_NAME
> 1.2 add braces in get_and_apply_property
>
> Changes from v5:
> 1. add get_and_apply_property function for optional parameters.
> 2. minor changes.
>
> Changes from v4:
> 1. add vdd-supply,vddio-supply,interrupts properties into yaml.
> 2. led-current -> vishay,led-current-milliamp in yaml.
> 3. add possible values enum list.
> 4. add bulk_read for result hi/lo registers.
> 5. add description of vcnl3020_data structure.
> 6. vcnl3020 id table is removed.
> 7. make "vishay,led-current-milliamp" optional in yaml and code.
>
> Changes from v3:
> 1. minor changes.
> 2. add i2c block to fix dts section in yaml.
>
> Changes from v2:
> 1. using regmap_read_poll_timeout instead of do-while in measurement
> function.
> 2. change struct i2client* in vcnl3020_data to struct dev*
> 3. enable REGMAP_I2C in Kconfig
>
> Changes from v1:
> 1. using regmap interface instead of i2c_smbus_* calls.
> 2. switch from probe to probe_new.
> 3. s32/int32_t -> int
>
> Ivan Mikhaylov (2):
> iio: proximity: provide device tree binding document
> iio: proximity: Add driver support for vcnl3020 proximity sensor
>
> .../bindings/iio/proximity/vcnl3020.yaml | 65 +++++
> drivers/iio/proximity/Kconfig | 11 +
> drivers/iio/proximity/Makefile | 1 +
> drivers/iio/proximity/vcnl3020.c | 234 ++++++++++++++++++
> 4 files changed, 311 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/proximity/vcnl3020.yaml
> create mode 100644 drivers/iio/proximity/vcnl3020.c
>
> --
> 2.21.1
>
--
With Best Regards,
Andy Shevchenko