Re: [PATCH v5 4/4] arm64: dts: ti: am6: Add VTM node

[Amit Kucheria]

Hi Keerthy,

Should the subject refer to am65x instead of am6 since your dtsi file
is called k3-am65-wakeup.dtsi?

Regards,
Amit

On Tue, Mar 31, 2020 at 1:24 PM Keerthy <j-keerthy@xxxxxx> wrote:
>
> VTM stands for voltage and thermal management. Add the vtm node and
> the associated thermal zones on the SoC.
>
> Signed-off-by: Keerthy <j-keerthy@xxxxxx>
> ---
>  arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi | 11 +++++++++++
>  1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> index f4227e2743f2..54a133fa1bf2 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
> @@ -89,4 +89,15 @@
>                 clocks = <&k3_clks 59 0>;
>                 clock-names = "gpio";
>         };
> +
> +       wkup_vtm0: thermal@42050000 {
> +               compatible = "ti,am654-vtm";
> +               reg = <0x42050000 0x25c>;
> +               power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>;
> +               #thermal-sensor-cells = <1>;
> +       };
> +
> +       thermal_zones: thermal-zones {
> +               #include "k3-am654-industrial-thermal.dtsi"
> +       };
>  };
> --
> 2.17.1
>