Re: [PATCH v5 2/5] media: i2c: ov5645: Drop reading clock-frequency dt-property

[Lad, Prabhakar]

Hi Geert,

Thank you for the review.

On Tue, Apr 7, 2020 at 8:17 AM Geert Uytterhoeven <geert@xxxxxxxxxxxxxx> wrote:
>
> Hi Prabhakar,
>
> On Mon, Apr 6, 2020 at 6:43 PM Lad Prabhakar
> <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> > Modes in the driver are based on xvclk frequency fixed to 24MHz, but where
> > as the OV5645 sensor can support the xvclk frequency ranging from 6MHz to
> > 24MHz. So instead making clock-frequency as dt-property just let the
> > driver enforce the required clock frequency.
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> Reviewed-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
>
> However, still wondering about the "xvclk" name above and in the definition
> below.  Is this the naming from the datasheet?
> The DT bindings nor the driver use the "xvclk" naming.
>
xvclk naming is from the datasheet, although the 0v5645 datasheet on
publicly available I have referred [1]/[2].
If I am not wrong all the ov sensors have the same naming convention as xvclk.

[1] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf
[2] https://www.ovt.com/download/sensorpdf/126/OmniVision_OV5645.pdf

Cheers,
--Prabhakar

> > --- a/drivers/media/i2c/ov5645.c
> > +++ b/drivers/media/i2c/ov5645.c
> > @@ -61,6 +61,8 @@
> >  #define OV5645_SDE_SAT_U               0x5583
> >  #define OV5645_SDE_SAT_V               0x5584
> >
> > +#define OV5645_XVCLK_FREQ              24000000
> > +
>
> Gr{oetje,eeting}s,
>
>                         Geert
>
> --
> Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
>
> In personal conversations with technical people, I call myself a hacker. But
> when I'm talking to journalists I just say "programmer" or something like that.
>                                 -- Linus Torvalds