Re: [RFC PATCH] coresight: dynamic-replicator: Fix handling of multiple connections

[Suzuki K Poulose]

On 04/07/2020 12:29 PM, Sai Prakash Ranjan wrote:
> Hi Suzuki,
>
> Thanks for looking into this issue.
>
> On 2020-04-07 15:54, Suzuki K Poulose wrote:
> > On 04/07/2020 10:46 AM, Sai Prakash Ranjan wrote:
> >
> > There seems to be two replicators back to back here. What is connected
> > to the other output of both of them ? Are there any TPIUs ? What happens
> > if you choose a sink on the other end of "swao_replicator" (ETB ?)
>
> The other outport of swao replicator is connected to EUD which is a
> QCOM specific HW which can be used as a sink like USB.
> And the other outport of other replicator(replicator_out) is connected to
> TPIU.
>
> > After boot, what do the idfilter registers read for both the 
> > replicators ?
>
> Added some prints in replicator_probe.
>
>  Âreplicator probe ret=-517 devname=6046000.replicator idfilter0=0x0 
> idfilter1=0x0
>  Âreplicator probe ret=0 devname=6b06000.replicator idfilter0=0xff 
> idfilter1=0xff
>  Âreplicator probe ret=0 devname=6046000.replicator idfilter0=0xff 
> idfilter1=0xff

Curious to see how the idfilterX is set to 0:
	 if that is never used.
		Or
	 if the user doesn't reset it back to 0xff.

Does your test ever touch EUD (enable the port for EUD at
swao-replicator) ? What are the values before you run your test ?


Suzuki