[PATCH 0/4] Move tx-deempth and tx swing to pci.txt

[Ansuel Smith]

In pushing some fixes to pcie qcom driver, one of the patch had to make
some fixes to tx deempth and tx swing. It was suggested to propose this
to the generic pci.txt as they are actually standard parameter than can
be tuned per board. I also notice these property are already used in
imx6 driver so this would also help to generalize it.

Ansuel Smith (4):
  devicetree: bindings: pci: document tx-deempth tx swing and rx-eq
    property
  drivers: pci: dwc: pci-imx6: update binding to generic name
  arm: dts: imx6: update pci binding to generic name
  devicetree: bindings: pci: fsl,imx6q-pcie: rename tx deemph and swing

 .../devicetree/bindings/pci/fsl,imx6q-pcie.txt | 12 ++++++------
 Documentation/devicetree/bindings/pci/pci.txt  | 18 ++++++++++++++++++
 arch/arm/boot/dts/imx6q-ba16.dtsi              |  4 ++--
 arch/arm/boot/dts/imx6qdl-var-dart.dtsi        |  4 ++--
 arch/arm/boot/dts/imx7d.dtsi                   |  2 +-
 drivers/pci/controller/dwc/pci-imx6.c          | 12 ++++++------
 6 files changed, 35 insertions(+), 17 deletions(-)

-- 
2.25.1