Re: [PATCH 5/5] rtc: at91sam9: add microchip,sam9x60-rtt

[Alexandre Belloni]

Hi,

This patch must come first. Also, the correct prefix is
dt-bindings: rtc:

On 10/04/2020 19:26:59+0300, Claudiu Beznea wrote:
> Add microchip,sam9x60-rtt to compatible list.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
> ---
>  Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> index 6ae79d1843f3..b2f913ff6c69 100644
> --- a/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> +++ b/Documentation/devicetree/bindings/rtc/atmel,at91sam9-rtc.txt
> @@ -1,7 +1,7 @@
>  Atmel AT91SAM9260 Real Time Timer
>  
>  Required properties:
> -- compatible: should be: "atmel,at91sam9260-rtt"
> +- compatible: should be: "atmel,at91sam9260-rtt" or "microchip,sam9x60-rtt"

If you had a fallback on atmel,at91sam9260-rtt, this would make merging
this series easier as this removes the need for 1/5 and 2/5.

I think 2/5 may be useful in the future but as far as the aic fixup
is concerned, both IPs are identical.

>  - reg: should encode the memory region of the RTT controller
>  - interrupts: rtt alarm/event interrupt
>  - clocks: should contain the 32 KHz slow clk that will drive the RTT block.
> -- 
> 2.7.4
> 

-- 
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com