Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt

[Claudiu.Beznea]

On 11.04.2020 01:26, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 10/04/2020 19:26:58+0300, Claudiu Beznea wrote:
>> Add RTT.
>>
>> Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx>
>> ---
>>  arch/arm/boot/dts/at91-sam9x60ek.dts | 5 +++++
>>  arch/arm/boot/dts/sam9x60.dtsi       | 7 +++++++
>>  2 files changed, 12 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
>> index ab3d2d9a420a..4020e79a958e 100644
>> --- a/arch/arm/boot/dts/at91-sam9x60ek.dts
>> +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
>> @@ -617,6 +617,11 @@
>>       };
>>  };
>>
>> +&rtt {
>> +     atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>> +     status = "okay";
> 
> Is there any point using a gpbr register while there is already a much
> better RTC in the system?

Only to have it also enabled.

> 
> In any case, this diff should be merge with the other at91-sam9x60ek.dts
> change instead of being with the dtsi change.

The changes in this patch are related to enabling the RTT. The other dts
change is related to enabling gpbr. The RTT uses that enabled gpbr -> one
change per patch.

If you still want to merge then, I'll do it, but then it becomes mixed.

> 
>> +};
>> +
>>  &shutdown_controller {
>>       atmel,shdwc-debouncer = <976>;
>>       status = "okay";
>> diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi
>> index 326b39328b58..e1d8e3a4cb0b 100644
>> --- a/arch/arm/boot/dts/sam9x60.dtsi
>> +++ b/arch/arm/boot/dts/sam9x60.dtsi
>> @@ -661,6 +661,13 @@
>>                               status = "disabled";
>>                       };
>>
>> +                     rtt: rtt@fffffe20 {
>> +                             compatible = "microchip,sam9x60-rtt";
>> +                             reg = <0xfffffe20 0x20>;
>> +                             interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
>> +                             clocks = <&clk32k 0>;
>> +                     };
>> +
>>                       pit: timer@fffffe40 {
>>                               compatible = "atmel,at91sam9260-pit";
>>                               reg = <0xfffffe40 0x10>;
>> --
>> 2.7.4
>>
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>