Re: [PATCH] arm64: dts: rockchip: remove bus-width from mmc nodes in rk3308.dtsi

[Robin Murphy]

On 2020-04-13 8:36 pm, Johan Jonker wrote:
> The 'bus-width' property for mmc nodes is defined both in
> 'rk3308.dtsi' and 'rk3308-roc-cc.dts'.
> In line with the other Rockchip SoCs define that in a user dts only,
> so remove all entries from mmc nodes in 'rk3308.dtsi'.

Judging by the pinctrl entries, these represent the number of pins 
provided by the SoC itself. Obviously boards need to override that if 
for some reason they don't wire up all the available data lines, but it 
seems backwards to have every board restate the SoC's default value.

In fact, having brought it up, for this particular case the pinctrl 
setting is inherently related to the bus width, so having one without 
the other in either place doesn't smell right.

Robin.

> Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx>
> ---
>   arch/arm64/boot/dts/rockchip/rk3308.dtsi | 3 ---
>   1 file changed, 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
> index a9b98555d..130771ede 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
> @@ -587,7 +587,6 @@
>   		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
>   		reg = <0x0 0xff480000 0x0 0x4000>;
>   		interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
> -		bus-width = <4>;
>   		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
>   			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
>   		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> @@ -602,7 +601,6 @@
>   		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
>   		reg = <0x0 0xff490000 0x0 0x4000>;
>   		interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
> -		bus-width = <8>;
>   		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
>   			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
>   		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
> @@ -615,7 +613,6 @@
>   		compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
>   		reg = <0x0 0xff4a0000 0x0 0x4000>;
>   		interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
> -		bus-width = <4>;
>   		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
>   			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
>   		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";