Re: [PATCH 4/5] ARM: dts: sam9x60: add rtt

[Claudiu.Beznea]

On 14.04.2020 16:12, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On 14/04/2020 13:05:03+0000, Claudiu.Beznea@xxxxxxxxxxxxx wrote:
>>>>> But this is very unlikely to happen because this would be limited to a
>>>>> single board device tree instead of impact every sam9x60 based boards.
>>>>
>>>> Very unlikely but a having a patch with diff like this:
>>>>
>>>> +&gpbr {
>>>> +     status = "okay";
>>>> +};
>>>> +
>>>> +&rtt {
>>>> +     atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
>>>> +     status = "okay";
>>>> +};
>>>> +
>>>>
>>>> and reverting it may affect the other users of gpbr in sam9x60ek.dts.
>>>>
>>>
>>> Again, this affects only sam9x60ek.dts instead of possibly multiple DTs
>>> that may be out of tree. So the risk of doing that is null.
>>
>> Anyway... I'll merge it although I don't consider is the right way.
>>
> 
> Do as you wish but a board DT change mixed with a dtsi is a no go.

I was talking about mixing these:

+&gpbr {
+     status = "okay";
+};
+
+&rtt {
+     atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+     status = "okay";
+};
+

> 
> 
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>