[PATCH 3/3] dt: Add additional option bindings for IDT VersaClock

From: Adam Ford
Date: Tue Apr 14 2020 - 15:39:09 EST


The VersaClock driver now supports some additional bindings to support
child nodes which can configure optional settings like mode, voltage
and slew.

This patch updates the binding document to describe what is available
in the driver.

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
index bcff681a4bd0..6165b6ddb1a9 100644
--- a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
+++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt
@@ -31,6 +31,29 @@ Required properties:
- 5p49v5933 and
- 5p49v5935: (optional) property not present or "clkin".

+For all output ports, a corresponding, optional child node named OUT1,
+OUT2, etc. can represent a each output, and the node can be used to
+specify the following:
+
+- itd,mode: can be one of the following:
+ - VC5_LVPECL
+ - VC5_CMOS
+ - VC5_HCSL33
+ - VC5_LVDS
+ - VC5_CMOS2
+ - VC5_CMOSD
+ - VC5_HCSL25
+
+- idt,voltage-microvolts: can be one of the following
+ - 1800000
+ - 2500000
+ - 3300000
+- idt,slew-percent: Percent of normal, can be one of
+ - 80
+ - 85
+ - 90
+ - 100
+
==Mapping between clock specifier and physical pins==

When referencing the provided clock in the DT using phandle and
@@ -81,6 +104,16 @@ i2c-master-node {
/* Connect XIN input to 25MHz reference */
clocks = <&ref25m>;
clock-names = "xin";
+
+ OUT1 {
+ itd,mode = <VC5_CMOS>;
+ idt,voltage-microvolts = <1800000>;
+ idt,slew-percent = <80>;
+ };
+ OUT2 {
+ ...
+ };
+ ...
};
};

--
2.25.1