Re: [PATCH v11 01/13] iommu: Introduce attach/detach_pasid_table API

From: Jacob Pan
Date: Tue Apr 14 2020 - 18:10:40 EST


Hi Eric,

There are some discussions about how to size the uAPI data.
https://lkml.org/lkml/2020/4/14/939

I think the problem with the current scheme is that when uAPI data gets
extended, if VFIO continue to use:

minsz = offsetofend(struct vfio_iommu_type1_set_pasid_table, config);
if (copy_from_user(&spt, (void __user *)arg, minsz))

It may copy more data from user than what was setup by the user.

So, as suggested by Alex, we could add argsz to the IOMMU uAPI struct.
So if argsz > minsz, then fail the attach_table since kernel might be
old, doesn't know about the extra data.
If argsz <= minsz, kernel can support the attach_table but must process
the data based on flags or config.

Does it make sense to you?


On Tue, 14 Apr 2020 17:05:55 +0200
Eric Auger <eric.auger@xxxxxxxxxx> wrote:

> From: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
>
> In virtualization use case, when a guest is assigned
> a PCI host device, protected by a virtual IOMMU on the guest,
> the physical IOMMU must be programmed to be consistent with
> the guest mappings. If the physical IOMMU supports two
> translation stages it makes sense to program guest mappings
> onto the first stage/level (ARM/Intel terminology) while the host
> owns the stage/level 2.
>
> In that case, it is mandated to trap on guest configuration
> settings and pass those to the physical iommu driver.
>
> This patch adds a new API to the iommu subsystem that allows
> to set/unset the pasid table information.
>
> A generic iommu_pasid_table_config struct is introduced in
> a new iommu.h uapi header. This is going to be used by the VFIO
> user API.
>
> Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> Signed-off-by: Liu, Yi L <yi.l.liu@xxxxxxxxxxxxxxx>
> Signed-off-by: Ashok Raj <ashok.raj@xxxxxxxxx>
> Signed-off-by: Jacob Pan <jacob.jun.pan@xxxxxxxxxxxxxxx>
> Signed-off-by: Eric Auger <eric.auger@xxxxxxxxxx>
> Reviewed-by: Jean-Philippe Brucker <jean-philippe.brucker@xxxxxxx>
> ---
> drivers/iommu/iommu.c | 19 ++++++++++++++
> include/linux/iommu.h | 18 ++++++++++++++
> include/uapi/linux/iommu.h | 51
> ++++++++++++++++++++++++++++++++++++++ 3 files changed, 88
> insertions(+)
>
> diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c
> index 2b471419e26c..b71ad56f8c99 100644
> --- a/drivers/iommu/iommu.c
> +++ b/drivers/iommu/iommu.c
> @@ -1723,6 +1723,25 @@ int iommu_sva_unbind_gpasid(struct
> iommu_domain *domain, struct device *dev, }
> EXPORT_SYMBOL_GPL(iommu_sva_unbind_gpasid);
>
> +int iommu_attach_pasid_table(struct iommu_domain *domain,
> + struct iommu_pasid_table_config *cfg)
> +{
> + if (unlikely(!domain->ops->attach_pasid_table))
> + return -ENODEV;
> +
> + return domain->ops->attach_pasid_table(domain, cfg);
> +}
> +EXPORT_SYMBOL_GPL(iommu_attach_pasid_table);
> +
> +void iommu_detach_pasid_table(struct iommu_domain *domain)
> +{
> + if (unlikely(!domain->ops->detach_pasid_table))
> + return;
> +
> + domain->ops->detach_pasid_table(domain);
> +}
> +EXPORT_SYMBOL_GPL(iommu_detach_pasid_table);
> +
> static void __iommu_detach_device(struct iommu_domain *domain,
> struct device *dev)
> {
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h
> index 7ef8b0bda695..3e1057c3585a 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -248,6 +248,8 @@ struct iommu_iotlb_gather {
> * @cache_invalidate: invalidate translation caches
> * @sva_bind_gpasid: bind guest pasid and mm
> * @sva_unbind_gpasid: unbind guest pasid and mm
> + * @attach_pasid_table: attach a pasid table
> + * @detach_pasid_table: detach the pasid table
> * @pgsize_bitmap: bitmap of all possible supported page sizes
> * @owner: Driver module providing these ops
> */
> @@ -307,6 +309,9 @@ struct iommu_ops {
> void *drvdata);
> void (*sva_unbind)(struct iommu_sva *handle);
> int (*sva_get_pasid)(struct iommu_sva *handle);
> + int (*attach_pasid_table)(struct iommu_domain *domain,
> + struct iommu_pasid_table_config
> *cfg);
> + void (*detach_pasid_table)(struct iommu_domain *domain);
>
> int (*page_response)(struct device *dev,
> struct iommu_fault_event *evt,
> @@ -446,6 +451,9 @@ extern int iommu_sva_bind_gpasid(struct
> iommu_domain *domain, struct device *dev, struct
> iommu_gpasid_bind_data *data); extern int
> iommu_sva_unbind_gpasid(struct iommu_domain *domain, struct device
> *dev, ioasid_t pasid); +extern int iommu_attach_pasid_table(struct
> iommu_domain *domain,
> + struct iommu_pasid_table_config
> *cfg); +extern void iommu_detach_pasid_table(struct iommu_domain
> *domain); extern struct iommu_domain *iommu_get_domain_for_dev(struct
> device *dev); extern struct iommu_domain *iommu_get_dma_domain(struct
> device *dev); extern int iommu_map(struct iommu_domain *domain,
> unsigned long iova, @@ -1048,6 +1056,16 @@ iommu_aux_get_pasid(struct
> iommu_domain *domain, struct device *dev) return -ENODEV;
> }
>
> +static inline
> +int iommu_attach_pasid_table(struct iommu_domain *domain,
> + struct iommu_pasid_table_config *cfg)
> +{
> + return -ENODEV;
> +}
> +
> +static inline
> +void iommu_detach_pasid_table(struct iommu_domain *domain) {}
> +
> static inline struct iommu_sva *
> iommu_sva_bind_device(struct device *dev, struct mm_struct *mm, void
> *drvdata) {
> diff --git a/include/uapi/linux/iommu.h b/include/uapi/linux/iommu.h
> index 4ad3496e5c43..8d00be10dc6d 100644
> --- a/include/uapi/linux/iommu.h
> +++ b/include/uapi/linux/iommu.h
> @@ -321,4 +321,55 @@ struct iommu_gpasid_bind_data {
> };
> };
>
> +/**
> + * struct iommu_pasid_smmuv3 - ARM SMMUv3 Stream Table Entry stage 1
> related
> + * information
> + * @version: API version of this structure
> + * @s1fmt: STE s1fmt (format of the CD table: single CD, linear table
> + * or 2-level table)
> + * @s1dss: STE s1dss (specifies the behavior when @pasid_bits != 0
> + * and no PASID is passed along with the incoming
> transaction)
> + * @padding: reserved for future use (should be zero)
> + *
> + * The PASID table is referred to as the Context Descriptor (CD)
> table on ARM
> + * SMMUv3. Please refer to the ARM SMMU 3.x spec (ARM IHI 0070A) for
> full
> + * details.
> + */
> +struct iommu_pasid_smmuv3 {
> +#define PASID_TABLE_SMMUV3_CFG_VERSION_1 1
> + __u32 version;
> + __u8 s1fmt;
> + __u8 s1dss;
> + __u8 padding[2];
> +};
> +
> +/**
> + * struct iommu_pasid_table_config - PASID table data used to bind
> guest PASID
> + * table to the host IOMMU
> + * @version: API version to prepare for future extensions
> + * @format: format of the PASID table
> + * @base_ptr: guest physical address of the PASID table
> + * @pasid_bits: number of PASID bits used in the PASID table
> + * @config: indicates whether the guest translation stage must
> + * be translated, bypassed or aborted.
> + * @padding: reserved for future use (should be zero)
> + * @smmuv3: table information when @format is
> %IOMMU_PASID_FORMAT_SMMUV3
> + */
> +struct iommu_pasid_table_config {
> +#define PASID_TABLE_CFG_VERSION_1 1
> + __u32 version;
> +#define IOMMU_PASID_FORMAT_SMMUV3 1
> + __u32 format;
> + __u64 base_ptr;
> + __u8 pasid_bits;
> +#define IOMMU_PASID_CONFIG_TRANSLATE 1
> +#define IOMMU_PASID_CONFIG_BYPASS 2
> +#define IOMMU_PASID_CONFIG_ABORT 3
> + __u8 config;
> + __u8 padding[6];
> + union {
> + struct iommu_pasid_smmuv3 smmuv3;
> + };
> +};
> +
> #endif /* _UAPI_IOMMU_H */

[Jacob Pan]