Re: [PATCH v3 1/3] soc: qcom: rpmpd: Allow RPMPD driver to be loaded as a module

[John Stultz]

On Tue, Apr 14, 2020 at 3:21 PM Bjorn Andersson
<bjorn.andersson@xxxxxxxxxx> wrote:
>
> On Thu 26 Mar 15:44 PDT 2020, John Stultz wrote:
>
> > This patch allow the rpmpd driver to be loaded as a permenent
> > module. Meaning it can be loaded from a module, but then cannot
> > be unloaded.
> >
> > Ideally, it would include a remove hook and related logic, but
> > apparently the genpd code isn't able to track usage and cleaning
> > things up? (See: https://lkml.org/lkml/2019/1/24/38)
> >
> > So making it a permenent module at least improves things slightly
> > over requiring it to be a built in driver.
> >
> > Feedback would be appreciated!
> >
> > Cc: Todd Kjos <tkjos@xxxxxxxxxx>
> > Cc: Saravana Kannan <saravanak@xxxxxxxxxx>
> > Cc: Andy Gross <agross@xxxxxxxxxx>
> > Cc: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > Cc: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> > Cc: linux-arm-msm@xxxxxxxxxxxxxxx
> > Acked-by: Saravana Kannan <saravanak@xxxxxxxxxx>
> > Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> > ---
> > v2:
> > * Fix MODULE_LICENSE to be GPL v2 as suggested by Bjorn
> > * Leave initcall as core_initcall, since that switches to module_initcall
> >   only when built as a module, also suggested by Bjorn
> > * Add module tags taken from Rajendra's earlier patch
> > ---
> >  drivers/soc/qcom/Kconfig | 4 ++--
> >  drivers/soc/qcom/rpmpd.c | 6 ++++++
> >  2 files changed, 8 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> > index d0a73e76d563..af774555b9d2 100644
> > --- a/drivers/soc/qcom/Kconfig
> > +++ b/drivers/soc/qcom/Kconfig
> > @@ -123,8 +123,8 @@ config QCOM_RPMHPD
> >         for the voltage rail.
> >
> >  config QCOM_RPMPD
> > -     bool "Qualcomm RPM Power domain driver"
> > -     depends on QCOM_SMD_RPM=y
> > +     tristate "Qualcomm RPM Power domain driver"
> > +     depends on QCOM_SMD_RPM
> >       help
> >         QCOM RPM Power domain driver to support power-domains with
> >         performance states. The driver communicates a performance state
> > diff --git a/drivers/soc/qcom/rpmpd.c b/drivers/soc/qcom/rpmpd.c
> > index 2b1834c5609a..22fe94c03e79 100644
> > --- a/drivers/soc/qcom/rpmpd.c
> > +++ b/drivers/soc/qcom/rpmpd.c
> > @@ -5,6 +5,7 @@
> >  #include <linux/init.h>
> >  #include <linux/kernel.h>
> >  #include <linux/mutex.h>
> > +#include <linux/module.h>
>
> module comes before mutex in the alphabet.

:) Thanks for catching that.

> >  #include <linux/pm_domain.h>
> >  #include <linux/of.h>
> >  #include <linux/of_device.h>
> > @@ -226,6 +227,7 @@ static const struct of_device_id rpmpd_match_table[] = {
> >       { .compatible = "qcom,qcs404-rpmpd", .data = &qcs404_desc },
> >       { }
> >  };
> > +MODULE_DEVICE_TABLE(of, rpmpd_match_table);
> >
> >  static int rpmpd_send_enable(struct rpmpd *pd, bool enable)
> >  {
> > @@ -422,3 +424,7 @@ static int __init rpmpd_init(void)
> >       return platform_driver_register(&rpmpd_driver);
> >  }
> >  core_initcall(rpmpd_init);
> > +
> > +MODULE_DESCRIPTION("Qualcomm Technologies, Inc. RPM Power Domain Driver");
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("platform:qcom-rpmpd");
>
> Is there any reason for this alias?
>
> The module will be automatically loaded based on compatible and the
> MODULE_DEVICE_TABLE() information above, and for ACPI would need a
> similar acpi_device_id table.

I pulled it in from Rajendra's earlier patch. I'm ok to drop it though.

I'll fix these up and respin. Thanks for the review!

thanks
-john