[PATCH] umh: always return error when helper was not called
From: Sergei Trofimovich
Date: Wed Apr 15 2020 - 03:09:42 EST
Before this change on a system with the following setup crashed kernel:
```
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH=""
kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e
```
The crash happens when a core dump is attempted:
```
[ 2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 2.819859] #PF: supervisor read access in kernel mode
[ 2.820035] #PF: error_code(0x0000) - not-present page
[ 2.820188] PGD 0 P4D 0
[ 2.820305] Oops: 0000 [#1] SMP PTI
[ 2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ #7
[ 2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
[ 2.821150] RIP: 0010:do_coredump+0xd80/0x1060
[ 2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8
0 0f 84 9c 01 00 00 44
[ 2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246
[ 2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a
[ 2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000
[ 2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00
[ 2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0
[ 2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000
[ 2.824285] FS: 00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000
[ 2.824767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0
[ 2.825479] Call Trace:
[ 2.825790] get_signal+0x11e/0x720
[ 2.826087] do_signal+0x1d/0x670
[ 2.826361] ? force_sig_info_to_task+0xc1/0xf0
[ 2.826691] ? force_sig_fault+0x3c/0x40
[ 2.826996] ? do_trap+0xc9/0x100
[ 2.827179] exit_to_usermode_loop+0x49/0x90
[ 2.827359] prepare_exit_to_usermode+0x77/0xb0
[ 2.827559] ? invalid_op+0xa/0x30
[ 2.827747] ret_from_intr+0x20/0x20
[ 2.827921] RIP: 0033:0x55e2c76d2129
[ 2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01 c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89 e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0
0 00 00 00 00 0f 1f 40
[ 2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246
[ 2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718
[ 2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001
[ 2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00
[ 2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040
[ 2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 2.829964] CR2: 0000000000000020
[ 2.830149] ---[ end trace ceed83d8c68a1bf1 ]---
```
Here is the sequence of events why it happens:
fs/coredump.c:do_coredump():
1. create 'coredump_params = { .file = NULL }'
2. detect pipe mode
3. `call_usermodehelper_setup(..., umh_pipe_setup, ...)`
4. `call_usermodehelper_exec()`
5. (if both succeeded) `file_start_write(cprm.file);`
Here crash happens at [5.] as `cprm.file` is still NULL.
Normally it works because `fs/coredump.c:umh_pipe_setup()` is called
successfully and populates `.file` field (or returns the error):
```
static int umh_pipe_setup(struct subprocess_info *info, struct cred *new)
{
//...
struct coredump_params *cp = (struct coredump_params *)info->data;
// ...
cp->file = files[1];
// ...
}
```
But in our case neither happens because `kernel/umh.c:call_usermodehelper_exec()`
has a special case:
```
int call_usermodehelper_exec(struct subprocess_info *sub_info, int wait)
{
int retval = 0;
// ...
/*
* If there is no binary for us to call, then just return and get out of
* here. This allows us to set STATIC_USERMODEHELPER_PATH to "" and
* disable all call_usermodehelper() calls.
*/
if (strlen(sub_info->path) == 0)
goto out;
...
out:
// ...
return retval;
```
This breaks assumption of `do_coredump()`: "either helper was called successfully
and created a file to dump core to or it failed".
This change converts this special case to `-EPERM` error.
This way we notify user that helper call was not successful
and don't attempt to act on uninitialized `.file` field.
User gets `"Core dump to |%s pipe failed\n` dmesg entry.
Reported-by: Sergey Kvachonok <ravenexp@xxxxxxxxx>
Reported-by: Tony Vroon <chainsaw@xxxxxxxxxx>
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199795
Signed-off-by: Sergei Trofimovich <slyfox@xxxxxxxxxx>
CC: Luis Chamberlain <mcgrof@xxxxxxxxxx>
CC: Alexander Viro <viro@xxxxxxxxxxxxxxxxxx>
CC: linux-fsdevel@xxxxxxxxxxxxxxx
---
kernel/umh.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/kernel/umh.c b/kernel/umh.c
index 7f255b5a8845..66b02634a9ba 100644
--- a/kernel/umh.c
+++ b/kernel/umh.c
@@ -565,8 +565,10 @@ int call_usermodehelper_exec(struct subprocess_info *sub_info, int wait)
* here. This allows us to set STATIC_USERMODEHELPER_PATH to "" and
* disable all call_usermodehelper() calls.
*/
- if (strlen(sub_info->path) == 0)
+ if (strlen(sub_info->path) == 0) {
+ retval = -EPERM;
goto out;
+ }
/*
* Set the completion pointer only if there is a waiter.
--
2.26.1