Re: [PATCH v2] mm: swap: use fixed-size readahead during swapoff
From: Andrea Righi
Date: Wed Apr 15 2020 - 03:33:08 EST
On Wed, Apr 15, 2020 at 10:37:00AM +0800, Huang, Ying wrote:
> Andrea Righi <andrea.righi@xxxxxxxxxxxxx> writes:
>
> > On Tue, Apr 14, 2020 at 09:31:24AM +0800, Huang, Ying wrote:
> >> Andrea Righi <andrea.righi@xxxxxxxxxxxxx> writes:
> >>
> >> > On Mon, Apr 13, 2020 at 09:00:34PM +0800, Huang, Ying wrote:
> >> >> Andrea Righi <andrea.righi@xxxxxxxxxxxxx> writes:
> >> >>
> >> >> [snip]
> >> >>
> >> >> > diff --git a/mm/swap_state.c b/mm/swap_state.c
> >> >> > index ebed37bbf7a3..c71abc8df304 100644
> >> >> > --- a/mm/swap_state.c
> >> >> > +++ b/mm/swap_state.c
> >> >> > @@ -20,6 +20,7 @@
> >> >> > #include <linux/migrate.h>
> >> >> > #include <linux/vmalloc.h>
> >> >> > #include <linux/swap_slots.h>
> >> >> > +#include <linux/oom.h>
> >> >> > #include <linux/huge_mm.h>
> >> >> >
> >> >> > #include <asm/pgtable.h>
> >> >> > @@ -507,6 +508,14 @@ static unsigned long swapin_nr_pages(unsigned long offset)
> >> >> > max_pages = 1 << READ_ONCE(page_cluster);
> >> >> > if (max_pages <= 1)
> >> >> > return 1;
> >> >> > + /*
> >> >> > + * If current task is using too much memory or swapoff is running
> >> >> > + * simply use the max readahead size. Since we likely want to load a
> >> >> > + * lot of pages back into memory, using a fixed-size max readhaead can
> >> >> > + * give better performance in this case.
> >> >> > + */
> >> >> > + if (oom_task_origin(current))
> >> >> > + return max_pages;
> >> >> >
> >> >> > hits = atomic_xchg(&swapin_readahead_hits, 0);
> >> >> > pages = __swapin_nr_pages(prev_offset, offset, hits, max_pages,
> >> >>
> >> >> Thinks this again. If my understanding were correct, the accessing
> >> >> pattern during swapoff is sequential, why swap readahead doesn't work?
> >> >> If so, can you root cause that firstly?
> >> >
> >> > Theoretically if the pattern is sequential the current heuristic should
> >> > already select a big readahead size, but apparently it's not doing that.
> >> >
> >> > I'll repeat my tests tracing the readahead size during swapoff to see
> >> > exactly what's going on here.
> >>
> >> I haven't verify it. It may be helpful to call lookup_swap_cache()
> >> before swapin_readahead() in unuse_pte_range(). The theory behind it is
> >> to update the swap readahead statistics via lookup_swap_cache().
> >
> > I did more tests trying to collect some useful information.
> >
> > In particular I've been focusing at tracing the distribution of the
> > values returned by swapin_nr_pages() in different scenarios.
> >
> > To do so I made swapin_nr_pages() trace-able and I used the following
> > bcc command to measure the distrubution of the returned values:
> >
> > # argdist-bpfcc -c -C 'r::swapin_nr_pages(unsigned long offset):unsigned long:$retval'
> >
> > I've collected this metric in the following scenarios:
> > - 5.6 vanilla
> > - 5.6 + lookup_swap_cache() before swapin_readahead() in
> > unuse_pte_range()
> > - 5.6 + atomic_inc(&swapin_readahead_hits) before swapin_readahead()
> > in unuse_pte_range()
> > - 5.6 + swapin_readahead_hits=last_readahead_pages (in the atomic way)
> > before swapin_readahead() in unuse_pte_range()
> >
> > Each kernel has been tested both with swappiness=0 and swappiness=60.
> > Results are pretty much identical changing the swappiness, so I'm just
> > reporting the default case here (w/ swappiness=60).
> >
> > Result
> > ======
> >
> > = swapoff performance (elapsed time) =
> >
> > vanilla 22.09s
> > lookup_swap_cache() 23.87s
> > hits++ 16.10s
> > hits=last_ra_pages 8.81s
> >
> > = swapin_nr_pages() $retval distribution =
> >
> > 5.6 vanilla:
> > r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
> > COUNT EVENT
> > 36948 $retval = 8
> > 44151 $retval = 4
> > 49290 $retval = 1
> > 527771 $retval = 2
> >
> > 5.6 lookup_swap_cache() before swapin_readahead():
> > r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
> > COUNT EVENT
> > 13093 $retval = 1
> > 56703 $retval = 8
> > 123067 $retval = 2
> > 366118 $retval = 4
> >
> > 5.6 atomic_inc(&swapin_readahead_hits) before swapin_readahead():
> > r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
> > COUNT EVENT
> > 2589 $retval = 1
> > 8016 $retval = 2
> > 40021 $retval = 8
> > 566038 $retval = 4
> >
> > 5.6 swapin_readahead_hits=last_readahead_pages before swapin_readahead():
> > r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
> > COUNT EVENT
> > 785 $retval = 2
> > 1072 $retval = 1
> > 21844 $retval = 4
> > 644168 $retval = 8
> >
> > In the vanilla case, the readahead heuristic seems to choose 2 pages
> > most of the time. This is because we are not properly considering the
> > hits (hits are always 0 in the swapoff code path) and, as you correctly
> > pointed out, we can fix this by calling lookup_swap_cache() in
> > unuse_pte_range() before calling swapin_readahead().
> >
> > With this change the distribution of the readahead size moves more
> > toward 4 pages, but we still have some 2s. That looks good, however it
> > doesn't seem to speed up swapoff very much... maybe because calling
> > lookup_swap_cache() introduces a small overhead? (still need to
> > investigate about this theory).
> >
> > In the next test I've tried to always increment hits by 1 before calling
> > swapin_readahead() in unuse_pte_range(). This is basically cheating,
> > because I'm faking the hit ratio, forcing the heuristic to use a larger
> > readahead size; in fact, the readahead size moves even more toward 4
> > pages and swapoff performance are a little better now.
> >
> > Pushing even more the "cheating" I can pretend that the previous
> > readahead was all hits (swapin_readahead_hits=last_readahead_pages), so
> > I'm forcing the heuristic to move toward the max size and keep using it.
> > The result here is pretty much identical to my fixed-size patch, because
> > swapin_nr_pages() returns the max readahead size pretty much all the
> > time during swapoff (8 pages or, more in general, vm.page-cluster).
> >
> > Personally I don't like very much forcing the heuristic in this way,
> > it'd be nice if it would just work by accounting the proper hit ratio
> > (so just by adding lookup_swap_cache() as you correctly suggested), but
> > this solution doesn't seem to improve performance in reality. For this
> > reason I still think we should consider the swapoff scenario like a
> > special one and somehow bypass the readahead heuristic and always return
> > the max readahead size.
> >
> > Looking at the hits of the previous step in the swapoff case just
> > doesn't work, because we may have some misses, but they will become hits
> > very soon, since we are reading all the swapped out pages back into
> > memory. This is why using the max readahead size gives better
> > swapoff performance.
> >
> > What do you think?
>
> >From your description, it appears that you are using cluster readahead
> instead of vma readahead. Can you verify this via,
>
> # cat /sys/kernel/mm/swap/vma_ra_enabled
# cat /sys/kernel/mm/swap/vma_ra_enabled
true
However, it's still using the cluster readahead because I'm using a
swap file and nr_rotate_swap=1, so, according to the following, it's
never using the vma readahead:
static inline bool swap_use_vma_readahead(void)
{
return READ_ONCE(enable_vma_readahead) && !atomic_read(&nr_rotate_swap);
}
I'll investigate more on this, I think there's no reason to prevent the
usage of vma readahead if the underlying device is non-rotational.
>
> And if it returns false, you can enable it via,
>
> # echo 1 > /sys/kernel/mm/swap/vma_ra_enabled
>
> Because now swapoff code swapin pages in the page table order instead of
> the swap entry order. But this will turn the sequential disk read to
> random disk read too. Let's see the performance results.
>
> And please make sure that in unuse_pte_range(), after
> lookup_swap_cache() returns non-NULL page, it's unnecessary to call
> swapin_readahead().
This is what I was missing! Sorry about that, I was still calling
swapin_readahead() even if the page was already in case, that was
unnecessary overhead and it was messing up the hit ratio!
With lookup_swap_cache() applied properly eveything looks way better:
r::swapin_nr_pages(unsigned long offset):unsigned long:$retval
COUNT EVENT
378 $retval = 1
2138 $retval = 2
25365 $retval = 4
105314 $retval = 8
swapof time: 9.87s
So, basically it gives the same performance result of my fixed-size
approach, but it's definitely a better and cleaner solution.
Just to make it clear, here's the patch that I applied (if it looks good
to you I can send another version with a better description):
mm/swapfile.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 9fd47e6f7a86..cb9eb517178d 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -1944,7 +1944,9 @@ static int unuse_pte_range(struct vm_area_struct *vma, pmd_t *pmd,
vmf.pmd = pmd;
last_ra = atomic_read(&last_readahead_pages);
atomic_set(&swapin_readahead_hits, last_ra);
- page = swapin_readahead(entry, GFP_HIGHUSER_MOVABLE, &vmf);
+ page = lookup_swap_cache(entry, vma, addr);
+ if (!page)
+ page = swapin_readahead(entry, GFP_HIGHUSER_MOVABLE, &vmf);
if (!page) {
if (*swap_map == 0 || *swap_map == SWAP_MAP_BAD)
goto try_next;
Thanks!
-Andrea