Re: [PATCH v6 08/12] arm: dts: s5pv210: Add G3D node

[H. Nikolaus Schaller]

> Am 15.04.2020 um 13:49 schrieb Krzysztof Kozlowski <krzk@xxxxxxxxxx>:
> 
> On Wed, 15 Apr 2020 at 10:36, H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> wrote:
>> 
>> From: Jonathan Bakker <xc-racer2@xxxxxxx>
>> 
>> to add support for SGX540 GPU.
> 
> Do not continue the subject in commit msg like it is one sentence.
> These are two separate sentences, so commit msg starts with capital
> letter and it is sentence by itself.
> 
>> Signed-off-by: Jonathan Bakker <xc-racer2@xxxxxxx>
>> Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
>> ---
>> arch/arm/boot/dts/s5pv210.dtsi | 15 +++++++++++++++
>> 1 file changed, 15 insertions(+)
>> 
>> diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
>> index 2ad642f51fd9..e7fc709c0cca 100644
>> --- a/arch/arm/boot/dts/s5pv210.dtsi
>> +++ b/arch/arm/boot/dts/s5pv210.dtsi
>> @@ -512,6 +512,21 @@ vic3: interrupt-controller@f2300000 {
>>                        #interrupt-cells = <1>;
>>                };
>> 
>> +               g3d: g3d@f3000000 {
>> +                       compatible = "samsung,s5pv210-sgx540-120";
>> +                       reg = <0xf3000000 0x10000>;
>> +                       interrupt-parent = <&vic2>;
>> +                       interrupts = <10>;
>> +                       clock-names = "sclk";
>> +                       clocks = <&clocks CLK_G3D>;
> 
> Not part of bindings, please remove or add to the bindings.

Well, the bindings should describe what is common for all SoC
and they are quite different in what they need in addition.

Thererfore we have no "additionalProperties: false" in the
bindings [PATCH v6 01/12].

> 
>> +
>> +                       power-domains = <&pd S5PV210_PD_G3D>;
> 
> Ditto

In this case it might be possible to add the clock/power-domains
etc. to a wrapper node compatible to "simple-pm-bus" or similar
and make the gpu a child of it.

@Jontahan: can you please give it a try?


> 
>> +
>> +                       assigned-clocks = <&clocks MOUT_G3D>, <&clocks DOUT_G3D>;
>> +                       assigned-clock-rates = <0>, <66700000>;
>> +                       assigned-clock-parents = <&clocks MOUT_MPLL>;
> 
> Probably this should have status disabled because you do not set
> regulator supply.
> 
> Best regards,
> Krzysztof

BR and thanks,
Nikolaus