Re: [PATCH 5/7] mmc: sdhci: simplify clock frequency calculation
From: Adrian Hunter
Date: Wed Apr 15 2020 - 09:55:39 EST
On 2/04/20 2:54 pm, MichaÅ MirosÅaw wrote:
> Make clock frequency calculations simpler by replacing loops
> with divide-and-clamp.
I am sorry, but I am not really sure the simplification is worth the code
churn, risk of introducing new bugs, or validation effort.
IMO, the loops, while perhaps inefficient, are not hard to understand.
>
> Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>
> ---
> drivers/mmc/host/sdhci.c | 56 +++++++++++++++++++---------------------
> drivers/mmc/host/sdhci.h | 4 +--
> 2 files changed, 29 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index ed88ac4e4cf3..d750c0997c3f 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1756,10 +1756,13 @@ static u16 sdhci_get_preset_value(struct sdhci_host *host)
> u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> unsigned int *actual_clock)
> {
> - int div = 0; /* Initialized for compiler warning */
> + unsigned int div = 0; /* Initialized for compiler warning */
> int real_div = div, clk_mul = 1;
> u16 clk = 0;
> - bool switch_base_clk = false;
> + bool use_base_clk;
> +
> + if (clock == 0)
> + unreachable();
>
> if (host->version >= SDHCI_SPEC_300) {
> if (host->preset_enabled) {
> @@ -1781,13 +1784,12 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> * Check if the Host Controller supports Programmable Clock
> * Mode.
> */
> - if (host->clk_mul) {
> - for (div = 1; div <= 1024; div++) {
> - if ((host->max_clk * host->clk_mul / div)
> - <= clock)
> - break;
> - }
> - if ((host->max_clk * host->clk_mul / div) <= clock) {
> + use_base_clk = !host->clk_mul;
> +
> + if (!use_base_clk) {
> + div = DIV_ROUND_UP(host->max_clk * host->clk_mul, clock);
> +
> + if (div <= SDHCI_MAX_DIV_SPEC_300 / 2 + 1) {
> /*
> * Set Programmable Clock Mode in the Clock
> * Control register.
> @@ -1798,35 +1800,31 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> div--;
> } else {
> /*
> - * Divisor can be too small to reach clock
> - * speed requirement. Then use the base clock.
> + * Divisor is too big for requested clock rate.
> + * Use the base clock, then.
> */
> - switch_base_clk = true;
> + use_base_clk = true;
> }
> }
>
> - if (!host->clk_mul || switch_base_clk) {
> - /* Version 3.00 divisors must be a multiple of 2. */
> - if (host->max_clk <= clock) {
> - div = 1;
> - if (host->quirks2 & SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN)
> - div = 2;
> - } else {
> - for (div = 2; div < SDHCI_MAX_DIV_SPEC_300;
> - div += 2) {
> - if ((host->max_clk / div) <= clock)
> - break;
> - }
> + if (use_base_clk) {
> + /* Version 3.00 divisors must be 1 or a multiple of 2. */
> + div = DIV_ROUND_UP(host->max_clk, clock);
> + if (div > 1) {
> + div = min(div, SDHCI_MAX_DIV_SPEC_300);
> + div = round_up(div, 2);
> }
> - real_div = div;
> div >>= 1;
> + if (host->quirks2 & SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN)
> + div += !div;
> +
> + real_div = div * 2 + !div;
> }
> } else {
> /* Version 2.00 divisors must be a power of 2. */
> - for (div = 1; div < SDHCI_MAX_DIV_SPEC_200; div *= 2) {
> - if ((host->max_clk / div) <= clock)
> - break;
> - }
> + div = DIV_ROUND_UP(host->max_clk, clock);
> + div = min(div, SDHCI_MAX_DIV_SPEC_200);
> + div = roundup_pow_of_two(div);
> real_div = div;
> div >>= 1;
> }
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 79dffbb731d3..ea8aabb3bf16 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -290,8 +290,8 @@
> * End of controller registers.
> */
>
> -#define SDHCI_MAX_DIV_SPEC_200 256
> -#define SDHCI_MAX_DIV_SPEC_300 2046
> +#define SDHCI_MAX_DIV_SPEC_200 256u
> +#define SDHCI_MAX_DIV_SPEC_300 2046u
>
> /*
> * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2.
>