[PATCH][RESEND] arm64: dts: imx8mm: fix dma peripheral type for SAI nodes

[Matt Porter]

The peripheral type specified in the dma phandle for each SAI node
is incorrect. Change it to specify the SAI peripheral.

Signed-off-by: Matt Porter <mporter@xxxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mm.dtsi | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index cc7152ecedd9..a8c678db651b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -277,7 +277,7 @@
 					 <&clk IMX8MM_CLK_SAI1_ROOT>,
 					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+				dmas = <&sdma2 0 24 0>, <&sdma2 1 24 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -290,7 +290,7 @@
 					<&clk IMX8MM_CLK_SAI2_ROOT>,
 					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+				dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -304,7 +304,7 @@
 					 <&clk IMX8MM_CLK_SAI3_ROOT>,
 					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+				dmas = <&sdma2 4 24 0>, <&sdma2 5 24 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -317,7 +317,7 @@
 					 <&clk IMX8MM_CLK_SAI5_ROOT>,
 					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+				dmas = <&sdma2 8 24 0>, <&sdma2 9 24 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -330,7 +330,7 @@
 					 <&clk IMX8MM_CLK_SAI6_ROOT>,
 					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
 				clock-names = "bus", "mclk1", "mclk2", "mclk3";
-				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+				dmas = <&sdma2 10 24 0>, <&sdma2 11 24 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
-- 
2.20.1