Re: [PATCH v9 0/6] Add battery charger driver support for MP2629

[Andy Shevchenko]

On Wed, Apr 15, 2020 at 7:53 PM saravanan sekar <sravanhome@xxxxxxxxx> wrote:
>
> Hi Andy,
>
> On 15/04/20 6:40 pm, Andy Shevchenko wrote:
> > On Wed, Apr 15, 2020 at 7:20 PM Saravanan Sekar <sravanhome@xxxxxxxxx> wrote:
> >> changes in v9:
> >>   - fixed review comments in mp2629 power supply such as resource based
> >>     iio channel, replace workqueue by threaded irq, irq get with "_optional"
> >>
> > May I ask you why you are ignoring my tag?
> > If you don't want to have your patches reviewed / applied, just don't send them.
>
>
> Sorry last time it was by mistake. But now I have added in below, if
> suppose to added in top its my ignorance

Ah, I see now. The idea of the tag given against cover letter that it
applies to entire series (if doesn't say otherwise).
It means, if you don't do any (drastic) changes to the patches, the
tag is still valid and you simple add it to each patch in the series
inside the commit message (usually after your SoB tag).

> >> changes in v8:
> >>   - fixed order of call in probe/remove in iio adc
> >>   - add ABI documentation for mp2629 power supply
> >>
> >> changes in v7:
> >>   - fixed probe/remove order, managed and unmanaged call mix use in adc.
> >>   - Documentation dual license, i2c node with controller address
> >>
> >> Overall looks good to me, FWIW,
> >> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> >>
> >> One question though in reply to patch 4.
>
>
> Please see here, this is first experience of tag in cover letter so just
> kept here as you gave against v7
>
> >>
> >> changes in v6:
> >>   - removed includes types.h in mfd, of_device.h in adc.
> >>   - fixed review comments parentheses, err check, kstrtouint
> >>
> >> changes in v5:
> >>   - removed platfrom data stored in mfd and directly accessed mfd struct in child
> >>   - fixed spell check and capitalization in mfd and documentation
> >>
> >> changes in v4:
> >>   - fixed capitalization in mfg Kconfig and documentation
> >>
> >> changes in v3:
> >>   - regmap for children passed using platform data and remove mfd driver info
> >>     access directly from children
> >>
> >> changes in v2:
> >>   - removed EXPORT_SYMBOL of register set/get helper
> >>   - regmap bit filed used, fixed other review comments
> >>
> >> This patch series add support for Battery charger control driver for Monolithic
> >> Power System's MP2629 chipset, includes MFD driver for ADC battery & input
> >> power supply measurement and battery charger control driver.
> >>
> >> Thanks,
> >> Saravanan
> >>
> >> Saravanan Sekar (6):
> >>    dt-bindings: mfd: add document bindings for mp2629
> >>    mfd: mp2629: Add support for mps battery charger
> >>    iio: adc: mp2629: Add support for mp2629 ADC driver
> >>    power: supply: Add support for mps mp2629 battery charger
> >>    power: supply: mp2629: Add impedance compenstation config
> >>    MAINTAINERS: Add entry for mp2629 Battery Charger driver
> >>
> >>   .../ABI/testing/sysfs-class-power-mp2629      |   8 +
> >>   .../devicetree/bindings/mfd/mps,mp2629.yaml   |  60 ++
> >>   MAINTAINERS                                   |   5 +
> >>   drivers/iio/adc/Kconfig                       |  10 +
> >>   drivers/iio/adc/Makefile                      |   1 +
> >>   drivers/iio/adc/mp2629_adc.c                  | 208 ++++++
> >>   drivers/mfd/Kconfig                           |   9 +
> >>   drivers/mfd/Makefile                          |   2 +
> >>   drivers/mfd/mp2629.c                          |  86 +++
> >>   drivers/power/supply/Kconfig                  |  10 +
> >>   drivers/power/supply/Makefile                 |   1 +
> >>   drivers/power/supply/mp2629_charger.c         | 667 ++++++++++++++++++
> >>   include/linux/mfd/mp2629.h                    |  28 +
> >>   13 files changed, 1095 insertions(+)
> >>   create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
> >>   create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
> >>   create mode 100644 drivers/iio/adc/mp2629_adc.c
> >>   create mode 100644 drivers/mfd/mp2629.c
> >>   create mode 100644 drivers/power/supply/mp2629_charger.c
> >>   create mode 100644 include/linux/mfd/mp2629.h
> >>
> >> --
> >> 2.17.1
> >>
> >



-- 
With Best Regards,
Andy Shevchenko