Re: [PATCH v1 2/2] ASoC: Add initial ZL38060 driver
From: Mark Brown
Date: Thu Apr 16 2020 - 11:52:11 EST
On Thu, Apr 16, 2020 at 11:23:14AM -0400, Sven Van Asbroeck wrote:
> On Thu, Apr 16, 2020 at 8:42 AM Mark Brown <broonie@xxxxxxxxxx> wrote:
> > > @@ -0,0 +1,643 @@
> > > +// SPDX-License-Identifier: GPL-2.0-only
> > > +/*
> > > + * Codec driver for Microsemi ZL38060 Connected Home Audio Processor.
> > > + *
> > Please make the entire comment a C++ one so things look more
> > intentional.
> The 'weird' combination of // SPDX and /* Description/copyright */ seems to
> be a kernel-wide standard (for C files, at least) ?
> E.g.:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/wm9090.c?h=v5.7-rc1#n2
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/codecs/wm8904.c?h=v5.7-rc1#n2
> Ok to keep?
Those were all automatically converted, one of these days I might get
round to updating them :/
> > This external amplifier support shouldn't be here, if there's other
> > devices in the system then they will have their own drivers and the
> > machine driver will take care of linking things together.
> In our application, the amp is a "dumb" class-D amp with a single enable line:
> https://www.onsemi.com/pub/Collateral/FAB3103-D.pdf
> I am not sure how I could make this more general. Could you point me to an
> example somewhere in the tree?
Look for GPIOs in machine drivers, there's quite a lot of examples (eg,
rx51 has a speaker amp although it's not the most modern).
> > > + priv->regmap = devm_regmap_init(dev, &zl38_regmap_bus, spi,
> > > + &zl38_regmap_conf);
> > > + if (IS_ERR(priv->regmap))
> > > + return PTR_ERR(priv->regmap);
> > devm_regmap_init_spi()
> I wish !! This chip has complex SPI addressing, using an "address" which:
> - is variable length, depending on the page of the register being accessed;
> - contains a field with the length of the data to follow.
OK.
Attachment:
signature.asc
Description: PGP signature