Re: [PATCH 1/1] HID: mcp2221: add GPIO functionality support

[Jiri Kosina]

On Tue, 14 Apr 2020, Rishi Gupta wrote:

> MCP2221 has 4 pins that can be used as GPIO or configured
> for alternate functionality such as clock generation and
> IRQ detection. This patch adds support for GPIO functionality.
> 
> To set direction of a pin or to toggle its state after it
> has been configured as GPIO, driver sends command to mcp2221
> and parses response received from mcp2221. Based on this
> response either 0 or appropriate error code is returned to
> GPIO framework.
> 
> To get the direction or current state of a pin, driver
> sends command and read response from the device. Based on
> the response received from device direction or value
> is sent to the GPIO framework.
> 
> Command from driver to mcp2221 device are output report.
> Response received from mcp2221 is input report.
> 
> Datasheet (page 45-48) contains details about how to decode
> the response received from device:
> http://ww1.microchip.com/downloads/en/DeviceDoc/20005565B.pdf
> 
> Signed-off-by: Rishi Gupta <gupt21@xxxxxxxxx>
> ---
>  drivers/hid/hid-mcp2221.c | 169 ++++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 169 insertions(+)

Applied, thanks.

-- 
Jiri Kosina
SUSE Labs