[PATCH 1/2] dt-bindings: phy-mtk-tphy: add the property about force_vbus

[Macpaul Lin]

For some platforms, they don't have vbus pin connection between usb's phy
and mac. Hence we need to control force_vbus related registers to keep
hardware works normal.
This patch add the required bool property force_vbus.

Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
index dd75b676b71d..6b49b651becc 100644
--- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt
@@ -37,6 +37,9 @@ Optional properties (controller (parent) node):
 		  calibrate
  - mediatek,src-coef	: coefficient for slew rate calibrate, depends on
 		  SoC process
+ - force_vbus	: if the platform has no vbus connection between phy and mac,
+		  (force_vbus mode), then this property should be exist.
+		  Otherwise not to add this property.
 
 Required properties (port (child) node):
 - reg		: address and length of the register set for the port.
-- 
2.18.0