[PATCH 1/2] dt-bindings: pinctrl: qcom: Add sm8250 pinctrl bindings

From: Bjorn Andersson
Date: Fri Apr 17 2020 - 02:19:39 EST


Add device tree binding Documentation details for Qualcomm SM8250
pinctrl driver.

Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
.../bindings/pinctrl/qcom,sm8250-pinctrl.yaml | 147 ++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
new file mode 100644
index 000000000000..6dc3b52f47cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm8250-pinctrl.yaml
@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,sm8250-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. SM8250 TLMM block
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block found in the
+ SM8250 platform.
+
+properties:
+ compatible:
+ const: qcom,sm8250-pinctrl
+
+ reg:
+ minItems: 3
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: "west"
+ - const: "south"
+ - const: "north"
+
+ interrupts:
+ description: Specifies the TLMM summary IRQ
+ maxItems: 1
+
+ interrupt-controller: true
+
+ '#interrupt-cells':
+ description:
+ Specifies the PIN numbers and Flags, as defined in defined in
+ include/dt-bindings/interrupt-controller/irq.h
+ const: 2
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description: Specifying the pin number and flags, as defined in
+ include/dt-bindings/gpio/gpio.h
+ const: 2
+
+ gpio-ranges:
+ maxItems: 1
+
+ wakeup-parent:
+ maxItems: 1
+
+#PIN CONFIGURATION NODES
+patternProperties:
+ '^.*$':
+ if:
+ type: object
+ then:
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-7][0-9])$"
+ - enum: [ sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ aoss_cti, atest, audio_ref, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4, cri_trng,
+ cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
+ ddr_pxi2, ddr_pxi3, dp_hot, dp_lcd, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
+ ibi_i3c, jitter_bist, lpass_slimbus, mdp_vsync, mdp_vsync0,
+ mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s0_data0, mi2s0_data1,
+ mi2s0_sck, mi2s0_ws, mi2s1_data0, mi2s1_data1, mi2s1_sck, mi2s1_ws,
+ mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, pci_e0, pci_e1,
+ pci_e2, phase_flag, pll_bist, pll_bypassnl, pll_clk, pll_reset,
+ pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, qspi0, qspi1, qspi2, qspi3,
+ qspi_clk, qspi_cs, qup0, qup1, qup10, qup11, qup12, qup13, qup14,
+ qup15, qup16, qup17, qup18, qup19, qup2, qup3, qup4, qup5, qup6,
+ qup7, qup8, qup9, qup_l4, qup_l5, qup_l6, sd_write, sdc40, sdc41,
+ sdc42, sdc43, sdc4_clk, sdc4_cmd, sec_mi2s, sp_cmu, tgu_ch0, tgu_ch1,
+ tgu_ch2, tgu_ch3, tsense_pwm1, tsense_pwm2, tsif0_clk, tsif0_data,
+ tsif0_en, tsif0_error, tsif0_sync, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, usb2phy_ac, usb_phy, vsense_trigger ]
+
+ drive-strength:
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]
+ default: 2
+ description:
+ Selects the drive strength for the specified pins, in mA.
+
+ bias-pull-down: true
+
+ bias-pull-up: true
+
+ bias-disable: true
+
+ output-high: true
+
+ output-low: true
+
+ required:
+ - pins
+ - function
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - interrupt-controller
+ - '#interrupt-cells'
+ - gpio-controller
+ - '#gpio-cells'
+ - gpio-ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ pinctrl@1f00000 {
+ compatible = "qcom,sm8250-pinctrl";
+ reg = <0x0f100000 0x300000>,
+ <0x0f500000 0x300000>,
+ <0x0f900000 0x300000>;
+ reg-names = "west", "south", "north";
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 180>;
+ wakeup-parent = <&pdc>;
+ };
--
2.24.0