Re: [PATCH v3 01/13] mfd: Add i.MX generic mix support

From: Lee Jones
Date: Fri Apr 17 2020 - 04:06:51 EST


On Wed, 15 Apr 2020, Abel Vesa wrote:

> Some of the i.MX SoCs have a IP for interfacing the dedicated IPs with
> clocks, resets and interrupts, plus some other specific control registers.
> To allow the functionality to be split between drivers, this MFD driver is
> added that has only two purposes: register the devices and map the entire
> register addresses. Everything else is left to the dedicated drivers that
> will bind to the registered devices.
>
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
> ---
> drivers/mfd/Kconfig | 11 +++++++++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/imx-mix.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 60 insertions(+)
> create mode 100644 drivers/mfd/imx-mix.c

For completeness - Arnd's reply to this patch:

https://www.spinics.net/lists/linux-clk/msg47703.html

--
Lee Jones [æçæ]
Linaro Services Technical Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog