Re: [PATCH v4 2/3] ARM: dts: rockchip: add rga node for rk322x

[Justin Swartz]

Hi Johan, Heiko,

On 2020-04-18 11:49, Heiko Stuebner wrote:

> Am Samstag, 18. April 2020, 11:15:27 CEST schrieb Johan Jonker:
>
> > Hi Justin, Heiko,
> >
> > In the discussion about "rockchip,px30-rga" it was mentioned that:
> > "no status for soc internal components without any board-specifics".
> > The binding is in mainline, but the dts node is missing I think.
> > Should this also be changed?
>
> yep, drop the status disabled from the dtsi and that then results
> in not needing the board-level enablement
>
> (background: rga is a simple mem2mem device without any
> board-specific hooks)

Shall I submit version 5 of this patch series?

> Johan
>
> +&rga {
> +    status = "okay";
> +};
> +
>
> Add a node to define the presence of RGA, a 2D raster
> graphic acceleration unit.
>
> Signed-off-by: Justin Swartz <justin.swartz@xxxxxxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/rk322x.dtsi | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/rk322x.dtsi 
> b/arch/arm/boot/dts/rk322x.dtsi
> index 340ed6ccb..29d50bebc 100644
> --- a/arch/arm/boot/dts/rk322x.dtsi
> +++ b/arch/arm/boot/dts/rk322x.dtsi
> @@ -621,6 +621,17 @@
> status = "disabled";
> };
>
> +    rga: rga@20060000 {
> +        compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga";
> +        reg = <0x20060000 0x1000>;
> +        interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> +        clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
> +        clock-names = "aclk", "hclk", "sclk";
> +        resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru 
> SRST_RGA_H>;
> +        reset-names = "core", "axi", "ahb";
> +        status = "disabled";
> remove?
>
> +    };
> +
> iep_mmu: iommu@20070800 {
> compatible = "rockchip,iommu";
> reg = <0x20070800 0x100>;