RE: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically

[Anson Huang]

> Subject: RE: [PATCH 1/2] arm64: dts: imx8qxp-mek: Sort labels alphabetically
> 
> > From: Anson Huang <Anson.Huang@xxxxxxx>
> > Sent: Friday, April 17, 2020 1:39 PM
> >
> > Sort the labels alphabetically for consistency.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> 
> This patch is meaningless as subsys prefix (e.g. adma_xxx) will be removed
> later and devices nodes all moved into subsys dtsi.
> I've replied this before:
> https://lkml.org/lkml/2020/3/16/244

I knew you replied this before, but do you have an exact day of when subsys dtsi will be implemented?
Many previous patches of my mine to add features to DTS file, I have been asked by Shawn to
add a new patch to help sort the labels, I think this is some maintainers' hobby, so if Shawn thinks no
need this for 8QXP, I can drop this patch.

Anson


> 
> Regards
> Aisheng
> 
> > ---
> >  arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 60
> > +++++++++++++--------------
> >  1 file changed, 30 insertions(+), 30 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > index 13460a3..2ed7aba 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
> > @@ -30,29 +30,8 @@
> >  	};
> >  };
> >
> > -&adma_lpuart0 {
> > -	pinctrl-names = "default";
> > -	pinctrl-0 = <&pinctrl_lpuart0>;
> > -	status = "okay";
> > -};
> > -
> > -&fec1 {
> > -	pinctrl-names = "default";
> > -	pinctrl-0 = <&pinctrl_fec1>;
> > -	phy-mode = "rgmii-id";
> > -	phy-handle = <&ethphy0>;
> > -	fsl,magic-packet;
> > +&adma_dsp {
> >  	status = "okay";
> > -
> > -	mdio {
> > -		#address-cells = <1>;
> > -		#size-cells = <0>;
> > -
> > -		ethphy0: ethernet-phy@0 {
> > -			compatible = "ethernet-phy-ieee802.3-c22";
> > -			reg = <0>;
> > -		};
> > -	};
> >  };
> >
> >  &adma_i2c1 {
> > @@ -131,6 +110,35 @@
> >  	};
> >  };
> >
> > +&adma_lpuart0 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_lpuart0>;
> > +	status = "okay";
> > +};
> > +
> > +&fec1 {
> > +	pinctrl-names = "default";
> > +	pinctrl-0 = <&pinctrl_fec1>;
> > +	phy-mode = "rgmii-id";
> > +	phy-handle = <&ethphy0>;
> > +	fsl,magic-packet;
> > +	status = "okay";
> > +
> > +	mdio {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		ethphy0: ethernet-phy@0 {
> > +			compatible = "ethernet-phy-ieee802.3-c22";
> > +			reg = <0>;
> > +		};
> > +	};
> > +};
> > +
> > +&scu_key {
> > +	status = "okay";
> > +};
> > +
> >  &usdhc1 {
> >  	assigned-clocks = <&clk IMX_CONN_SDHC0_CLK>;
> >  	assigned-clock-rates = <200000000>;
> > @@ -229,11 +237,3 @@
> >  		>;
> >  	};
> >  };
> > -
> > -&adma_dsp {
> > -	status = "okay";
> > -};
> > -
> > -&scu_key {
> > -	status = "okay";
> > -};
> > --
> > 2.7.4