Re: [v3 PATCH 5/5] RISC-V: Add EFI stub support.

From: Ard Biesheuvel
Date: Mon Apr 20 2020 - 03:04:10 EST

Next message: Jiri Slaby: "[PATCH] cgroup, netclassid: remove double cond_resched"
Previous message: Ulf Hansson: "Re: [PATCH 4.19.113 0/3] Fix for long operation cmds busy detection"
In reply to: Atish Patra: "Re: [v3 PATCH 5/5] RISC-V: Add EFI stub support."
Next in thread: Atish Patra: "Re: [v3 PATCH 5/5] RISC-V: Add EFI stub support."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, 20 Apr 2020 at 06:20, Atish Patra <Atish.Patra@xxxxxxx> wrote:
>
> On Sat, 2020-04-18 at 21:24 +0200, Ard Biesheuvel wrote:
> > On Sat, 18 Apr 2020 at 21:19, Atish Patra <atishp@xxxxxxxxxxxxxx>
> > wrote:
> > > On Sat, Apr 18, 2020 at 5:39 AM Ard Biesheuvel <ardb@xxxxxxxxxx>
> > > wrote:
> > > > On Sat, 18 Apr 2020 at 12:51, Ard Biesheuvel <ardb@xxxxxxxxxx>
> > > > wrote:
> > > > > On Sat, 18 Apr 2020 at 05:03, Atish Patra <
> > > > > atishp@xxxxxxxxxxxxxx> wrote:
> > > > > > On Thu, Apr 16, 2020 at 12:41 AM Ard Biesheuvel <
> > > > > > ardb@xxxxxxxxxx> wrote:
> > > > > > > On Wed, 15 Apr 2020 at 21:54, Atish Patra <
> > > > > > > atish.patra@xxxxxxx> wrote:
> > > > > > > > Add a RISC-V architecture specific stub code that
> > > > > > > > actually copies the
> > > > > > > > actual kernel image to a valid address and jump to it
> > > > > > > > after boot services
> > > > > > > > are terminated. Enable UEFI related kernel configs as
> > > > > > > > well for RISC-V.
> > > > > > > >
> > > > > > > > Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
> > > > > > > > ---
> > > > > > > > arch/riscv/Kconfig | 20 ++++
> > > > > > > > arch/riscv/Makefile | 1 +
> > > > > > > > arch/riscv/configs/defconfig | 1 +
> > > > > > > > arch/riscv/include/asm/efi.h | 44
> > > > > > > > +++++++++
> > > > > > > > drivers/firmware/efi/Kconfig | 2 +-
> > > > > > > > drivers/firmware/efi/libstub/Makefile | 7 ++
> > > > > > > > drivers/firmware/efi/libstub/riscv-stub.c | 111
> > > > > > > > ++++++++++++++++++++++
> > > > > > > > 7 files changed, 185 insertions(+), 1 deletion(-)
> > > > > > > > create mode 100644 arch/riscv/include/asm/efi.h
> > > > > > > > create mode 100644 drivers/firmware/efi/libstub/riscv-
> > > > > > > > stub.c
> > > > > > > >
> > > > > > > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > > > > > > index f39e326a7a42..eb4f41c8f3ce 100644
> > > > > > > > --- a/arch/riscv/Kconfig
> > > > > > > > +++ b/arch/riscv/Kconfig
> > > > > > > > @@ -379,10 +379,30 @@ config CMDLINE_FORCE
> > > > > > > >
> > > > > > > > endchoice
> > > > > > > >
> > > > > > > > +config EFI_STUB
> > > > > > > > + bool
> > > > > > > > +
> > > > > > > > +config EFI
> > > > > > > > + bool "UEFI runtime support"
> > > > > > > > + depends on OF
> > > > > > > > + select LIBFDT
> > > > > > > > + select UCS2_STRING
> > > > > > > > + select EFI_PARAMS_FROM_FDT
> > > > > > > > + select EFI_STUB
> > > > > > > > + select EFI_GENERIC_STUB
> > > > > > > > + default y
> > > > > > > > + help
> > > > > > > > + This option provides support for runtime
> > > > > > > > services provided
> > > > > > > > + by UEFI firmware (such as non-volatile
> > > > > > > > variables, realtime
> > > > > > > > + clock, and platform reset). A UEFI stub is
> > > > > > > > also provided to
> > > > > > > > + allow the kernel to be booted as an EFI
> > > > > > > > application. This
> > > > > > > > + is only useful on systems that have UEFI
> > > > > > > > firmware.
> > > > > > > > +
> > > > > > > > endmenu
> > > > > > > >
> > > > > > > > menu "Power management options"
> > > > > > > >
> > > > > > > > source "kernel/power/Kconfig"
> > > > > > > > +source "drivers/firmware/Kconfig"
> > > > > > > >
> > > > > > > > endmenu
> > > > > > > > diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
> > > > > > > > index fb6e37db836d..079435804d6d 100644
> > > > > > > > --- a/arch/riscv/Makefile
> > > > > > > > +++ b/arch/riscv/Makefile
> > > > > > > > @@ -80,6 +80,7 @@ head-y := arch/riscv/kernel/head.o
> > > > > > > > core-y += arch/riscv/
> > > > > > > >
> > > > > > > > libs-y += arch/riscv/lib/
> > > > > > > > +core-$(CONFIG_EFI_STUB) +=
> > > > > > > > $(objtree)/drivers/firmware/efi/libstub/lib.a
> > > > > > > >
> > > > > > > > PHONY += vdso_install
> > > > > > > > vdso_install:
> > > > > > > > diff --git a/arch/riscv/configs/defconfig
> > > > > > > > b/arch/riscv/configs/defconfig
> > > > > > > > index 4da4886246a4..ae69e12d306a 100644
> > > > > > > > --- a/arch/riscv/configs/defconfig
> > > > > > > > +++ b/arch/riscv/configs/defconfig
> > > > > > > > @@ -129,3 +129,4 @@ CONFIG_DEBUG_BLOCK_EXT_DEVT=y
> > > > > > > > # CONFIG_RUNTIME_TESTING_MENU is not set
> > > > > > > > CONFIG_MEMTEST=y
> > > > > > > > # CONFIG_SYSFS_SYSCALL is not set
> > > > > > > > +CONFIG_EFI=y
> > > > > > > > diff --git a/arch/riscv/include/asm/efi.h
> > > > > > > > b/arch/riscv/include/asm/efi.h
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..62d7d5eafed8
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/arch/riscv/include/asm/efi.h
> > > > > > > > @@ -0,0 +1,44 @@
> > > > > > > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > > > > > > +/*
> > > > > > > > + * Copyright (C) 2020 Western Digital Corporation or its
> > > > > > > > affiliates.
> > > > > > > > + * Based on arch/arm64/include/asm/efi.h
> > > > > > > > + */
> > > > > > > > +#ifndef _ASM_EFI_H
> > > > > > > > +#define _ASM_EFI_H
> > > > > > > > +
> > > > > > > > +#include <asm/io.h>
> > > > > > > > +#include <asm/mmu_context.h>
> > > > > > > > +#include <asm/ptrace.h>
> > > > > > > > +#include <asm/tlbflush.h>
> > > > > > > > +
> > > > > > > > +#define VA_BITS_MIN 39
> > > > > > > > +
> > > > > > > > +/* on RISC-V, the FDT may be located anywhere in system
> > > > > > > > RAM */
> > > > > > > > +static inline unsigned long
> > > > > > > > efi_get_max_fdt_addr(unsigned long dram_base)
> > > > > > > > +{
> > > > > > > > + return ULONG_MAX;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +/* Load initrd at enough distance from DRAM start */
> > > > > > > > +static inline unsigned long
> > > > > > > > efi_get_max_initrd_addr(unsigned long dram_base,
> > > > > > > > + unsig
> > > > > > > > ned long image_addr)
> > > > > > > > +{
> > > > > > > > + return dram_base + SZ_256M;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +#define efi_bs_call(func, ...) efi_system_table()-
> > > > > > > > >boottime->func(__VA_ARGS__)
> > > > > > > > +#define efi_rt_call(func, ...) efi_system_table()-
> > > > > > > > >runtime->func(__VA_ARGS__)
> > > > > > > > +#define efi_is_native() (true)
> > > > > > > > +
> > > > > > > > +#define efi_table_attr(inst, attr) (inst->attr)
> > > > > > > > +
> > > > > > > > +#define efi_call_proto(inst, func, ...) inst->func(inst,
> > > > > > > > ##__VA_ARGS__)
> > > > > > > > +
> > > > > > > > +#define
> > > > > > > > alloc_screen_info(x...) (&screen_info)
> > > > > > > > +extern char stext_offset[];
> > > > > > > > +
> > > > > > > > +static inline void free_screen_info(struct screen_info
> > > > > > > > *si)
> > > > > > > > +{
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +#endif /* _ASM_EFI_H */
> > > > > > > > diff --git a/drivers/firmware/efi/Kconfig
> > > > > > > > b/drivers/firmware/efi/Kconfig
> > > > > > > > index 2a2b2b96a1dc..fcdc789d3f87 100644
> > > > > > > > --- a/drivers/firmware/efi/Kconfig
> > > > > > > > +++ b/drivers/firmware/efi/Kconfig
> > > > > > > > @@ -111,7 +111,7 @@ config EFI_GENERIC_STUB
> > > > > > > >
> > > > > > > > config EFI_ARMSTUB_DTB_LOADER
> > > > > > > > bool "Enable the DTB loader"
> > > > > > > > - depends on EFI_GENERIC_STUB
> > > > > > > > + depends on EFI_GENERIC_STUB && !RISCV
> > > > > > > > default y
> > > > > > > > help
> > > > > > > > Select this config option to add support for
> > > > > > > > the dtb= command
> > > > > > > > diff --git a/drivers/firmware/efi/libstub/Makefile
> > > > > > > > b/drivers/firmware/efi/libstub/Makefile
> > > > > > > > index 2b4e09bf987c..7d46b70b51f2 100644
> > > > > > > > --- a/drivers/firmware/efi/libstub/Makefile
> > > > > > > > +++ b/drivers/firmware/efi/libstub/Makefile
> > > > > > > > @@ -22,6 +22,8 @@ cflags-
> > > > > > > > $(CONFIG_ARM64) := $(subst
> > > > > > > > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > > > > > > > cflags-$(CONFIG_ARM) := $(subst
> > > > > > > > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > > > > > > > -fno-builtin -fpic \
> > > > > > > > $(call cc-option,-mno-
> > > > > > > > single-pic-base)
> > > > > > > > +cflags-$(CONFIG_RISCV) := $(subst
> > > > > > > > $(CC_FLAGS_FTRACE),,$(KBUILD_CFLAGS)) \
> > > > > > > > + -fpic
> > > > > > > >
> > > > > > > > cflags-$(CONFIG_EFI_GENERIC_STUB) +=
> > > > > > > > -I$(srctree)/scripts/dtc/libfdt
> > > > > > > >
> > > > > > > > @@ -57,6 +59,7 @@ lib-
> > > > > > > > $(CONFIG_EFI_GENERIC_STUB) += efi-stub.o
> > > > > > > > fdt.o string.o \
> > > > > > > > lib-$(CONFIG_ARM) += arm32-stub.o
> > > > > > > > lib-$(CONFIG_ARM64) += arm64-stub.o
> > > > > > > > lib-$(CONFIG_X86) += x86-stub.o
> > > > > > > > +lib-$(CONFIG_RISCV) += riscv-stub.o
> > > > > > > > CFLAGS_arm32-stub.o :=
> > > > > > > > -DTEXT_OFFSET=$(TEXT_OFFSET)
> > > > > > > > CFLAGS_arm64-stub.o :=
> > > > > > > > -DTEXT_OFFSET=$(TEXT_OFFSET)
> > > > > > > >
> > > > > > > > @@ -81,6 +84,10 @@ STUBCOPY_FLAGS-
> > > > > > > > $(CONFIG_ARM64) += --prefix-alloc-sections=.init \
> > > > > > > > --prefix-
> > > > > > > > symbols=__efistub_
> > > > > > > > STUBCOPY_RELOC-$(CONFIG_ARM64) := R_AARCH64_ABS
> > > > > > > >
> > > > > > > > +STUBCOPY_FLAGS-$(CONFIG_RISCV) += --prefix-alloc-
> > > > > > > > sections=.init \
> > > > > > > > + --prefix-
> > > > > > > > symbols=__efistub_
> > > > > > > > +STUBCOPY_RELOC-$(CONFIG_RISCV) := R_RISCV_HI20
> > > > > > > > +
> > > > > > > > $(obj)/%.stub.o: $(obj)/%.o FORCE
> > > > > > > > $(call if_changed,stubcopy)
> > > > > > > >
> > > > > > > > diff --git a/drivers/firmware/efi/libstub/riscv-stub.c
> > > > > > > > b/drivers/firmware/efi/libstub/riscv-stub.c
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..69d13e0ebaea
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/drivers/firmware/efi/libstub/riscv-stub.c
> > > > > > > > @@ -0,0 +1,111 @@
> > > > > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > > > > +/*
> > > > > > > > + * Copyright (C) 2013, 2014 Linaro Ltd; <
> > > > > > > > roy.franz@xxxxxxxxxx>
> > > > > > > > + * Copyright (C) 2020 Western Digital Corporation or its
> > > > > > > > affiliates.
> > > > > > > > + *
> > > > > > > > + * This file implements the EFI boot stub for the RISC-V
> > > > > > > > kernel.
> > > > > > > > + * Adapted from ARM64 version at
> > > > > > > > drivers/firmware/efi/libstub/arm64-stub.c.
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > +#include <linux/efi.h>
> > > > > > > > +#include <linux/libfdt.h>
> > > > > > > > +#include <linux/libfdt_env.h>
> > > > > > > > +#include <asm/efi.h>
> > > > > > > > +#include <asm/sections.h>
> > > > > > > > +
> > > > > > > > +#include "efistub.h"
> > > > > > > > +/*
> > > > > > > > + * RISCV requires the kernel image to placed TEXT_OFFSET
> > > > > > > > bytes beyond a 2 MB
> > > > > > > > + * aligned base for 64 bit and 4MB for 32 bit.
> > > > > > > > + */
> > > > > >
> > > > > > Fixed the comment.
> > > > > >
> > > > > > > > +#ifdef CONFIG_64BIT
> > > > > > > > +#define MIN_KIMG_ALIGN SZ_2M
> > > > > > > > +#else
> > > > > > > > +#define MIN_KIMG_ALIGN SZ_4M
> > > > > > > > +#endif
> > > > > > > > +
> > > > > > > > +typedef __attribute__((noreturn)) void
> > > > > > > > (*jump_kernel_func)(unsigned int,
> > > > > > > > +
> > > > > > > > unsigned long);
> > > > > > > > +efi_status_t check_platform_features(void)
> > > > > > > > +{
> > > > > > > > + return EFI_SUCCESS;
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +static u32 get_boot_hartid_from_fdt(unsigned long fdt)
> > > > > > > > +{
> > > > > > > > + int chosen_node, len;
> > > > > > > > + const fdt32_t *prop;
> > > > > > > > +
> > > > > > > > + chosen_node = fdt_path_offset((void *)fdt,
> > > > > > > > "/chosen");
> > > > > > > > + if (chosen_node < 0)
> > > > > > > > + return U32_MAX;
> > > > > > > > + prop = fdt_getprop((void *)fdt, chosen_node,
> > > > > > > > "boot-hartid", &len);
> > > > > > > > + if (!prop || len != sizeof(u32))
> > > > > > > > + return U32_MAX;
> > > > > > > > +
> > > > > > > > + return fdt32_to_cpu(*prop);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +/*
> > > > > > > > + * Jump to real kernel here with following constraints.
> > > > > > > > + * 1. MMU should be disabled.
> > > > > > > > + * 2. a0 should contain hartid
> > > > > > > > + * 3. a1 should DT address
> > > > > > > > + */
> > > > > > > > +void __noreturn efi_enter_kernel(unsigned long
> > > > > > > > entrypoint, unsigned long fdt,
> > > > > > > > + unsigned long fdt_size)
> > > > > > > > +{
> > > > > > > > + unsigned long kernel_entry = entrypoint +
> > > > > > > > (unsigned long)stext_offset;
> > > > > > > > + jump_kernel_func jump_kernel = (jump_kernel_func)
> > > > > > > > kernel_entry;
> > > > > > > > + u32 hartid = get_boot_hartid_from_fdt(fdt);
> > > > > > > > +
> > > > > > > > + if (hartid == U32_MAX)
> > > > > > > > + /* We can not use panic or BUG at this
> > > > > > > > point */
> > > > > > > > + __asm__ __volatile__ ("ebreak");
> > > > > > > > + /* Disable MMU */
> > > > > > > > + csr_write(CSR_SATP, 0);
> > > > > > > > + jump_kernel(hartid, fdt);
> > > > > > > > +}
> > > > > > > > +
> > > > > > > > +efi_status_t handle_kernel_image(unsigned long
> > > > > > > > *image_addr,
> > > > > > > > + unsigned long
> > > > > > > > *image_size,
> > > > > > > > + unsigned long
> > > > > > > > *reserve_addr,
> > > > > > > > + unsigned long
> > > > > > > > *reserve_size,
> > > > > > > > + unsigned long dram_base,
> > > > > > > > + efi_loaded_image_t
> > > > > > > > *image)
> > > > > > > > +{
> > > > > > > > + efi_status_t status;
> > > > > > > > + unsigned long kernel_size, kernel_memsize = 0;
> > > > > > > > + unsigned long max_alloc_address;
> > > > > > > > +
> > > > > > > > + if (image->image_base != _start)
> > > > > > > > + pr_efi_err("FIRMWARE BUG:
> > > > > > > > efi_loaded_image_t::image_base has bogus value\n");
> > > > > > > > +
> > > > > > >
> > > > > > > I don't think you need this.
> > > > > > >
> > > > > >
> > > > > > Sure. I will remove it. I guess ARM64 code has the error
> > > > > > print for
> > > > > > legacy loader code ?
> > > > > >
> > > > >
> > > > > No, for broken distro versions of GRUB
> > > > >
> > > > > > > > + kernel_size = _edata - _start;
> > > > > > > > + kernel_memsize = kernel_size + (_end - _edata);
> > > > > > > > + max_alloc_address = round_up(dram_base,
> > > > > > > > MIN_KIMG_ALIGN) +
> > > > > > > > + kernel_memsize;
> > > > > > > > +
> > > > > > >
> > > > > > > You said the kernel could be anywhere in memory, as long as
> > > > > > > it is
> > > > > > > aligned correctly, right?
> > > > > >
> > > > > > Sorry I was wrong about this. RISC-V kernel maps PAGE_OFFSET
> > > > > > virtual
> > > > > > address to the
> > > > > > physical address <xyz> where it is booted. That means memory
> > > > > > between
> > > > > > dram start and and <xyz> address
> > > > > > will be unusable.
> > > > > >
> > > > >
> > > > > OK
> > > > >
> > > > > > I also realized that the above computing max_address as above
> > > > > > also
> > > > > > won't work for the following reason.
> > > > > > efi_allocate_pages_aligned actually ALIGN_DOWN the
> > > > > > max_address. Thus,
> > > > > > efi won't find enough
> > > > > > free memory in this case if the max_address is computed from
> > > > > > the dram_base.
> > > > > >
> > > > > > Is there an implicit requirement for
> > > > > > efi_allocate_pages_aligned or
> > > > > > efi_low_alloc_above should be tried in case of failure?
> > > > > >
> > > > >
> > > > > No not really. What ever works for your particular use case is
> > > > > acceptable to me.
> > > > >
> > > > > > > In that case, you don't need this, you can simply pass
> > > > > > > ULONG_MAX as
> > > > > > > the max address.
> > > > > > >
> > > > > > As RISC-V should allocate memory as low as possible to avoid
> > > > > > memory
> > > > > > wastage, I think the following should work.
> > > > > >
> > > > > > efi_low_alloc_above(*reserve_size, MIN_KIMG_ALIGN,
> > > > > > reserve_addr, dram_base);
> > > > > >
> > > > > > If this looks okay to you, efi_low_alloc_above should be
> > > > > > moved back to
> > > > > > mem.c from relocate.c.
> > > > > > Should I do it in a separate patch or the original patch
> > > > > > should be
> > > > > > modified so that efi_low_alloc_above was never moved to
> > > > > > relocate.c
> > > > > >
> > > > >
> > > > > No, please keep efi_low_alloc_above() where it is, but drop the
> > > > > static, and put back the declaration in efistub.h
> > > > >
> > > >
> > > > Alternatively, can you check whether efi_relocate_kernel()
> > > > already
> > > > does what you need?
> > >
> > > Yeah. efi_relocate_kernel works too. It's just that
> > > efi_relocate_kernel expects a preferred address
> > > which RISC-V doesn't care about.
> >
> > There is a preferred address, no? The base of DRAM?
> >
>
> I just realized that my reply from my gmail never landed in any of the
> mailing lists. If you have already received it, sorry for the spam.
>
> "If the preferred address is set as the base of DRAM, efi_bs_call is
> bound to fail as well because the base of DRAM is reserved by the
> firmware. So the efi memory allocator can't allocate at that address.
> Technically, it will work but it is no different than passing
> ULONG_MAX. So I thought ULONG_MAX will avoid the confusion.
>
> We try to allocate as low as possible so I am passing dram_base as the
> minimum address anyways. As the firmware reserved the first few KBs,
>

OK, so the preferred address *is* the base of DRAM (assuming it is 2
MB aligned). However, in the general case, you keep some firmware
state there (couple of KB) and so you typically end up at DRAM base
plus 2 MB?

So first question: why does the firmware put this stuff at the base of
DRAM in the first place? Does it *have* to live there?

Then, if the base of DRAM is guaranteed to be occupied, why not make
the preferred address base of DRAM + 2 MB ? (or 4 MB for the 32-bit
case)

Next message: Jiri Slaby: "[PATCH] cgroup, netclassid: remove double cond_resched"
Previous message: Ulf Hansson: "Re: [PATCH 4.19.113 0/3] Fix for long operation cmds busy detection"
In reply to: Atish Patra: "Re: [v3 PATCH 5/5] RISC-V: Add EFI stub support."
Next in thread: Atish Patra: "Re: [v3 PATCH 5/5] RISC-V: Add EFI stub support."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]