Re: [PATCH v8 3/3] tty: samsung_tty: 32-bit access for TX/RX hold registers

[Hyunki Koo]

sorry, cover-letter [PATCH v8 0/3] does not sent, I will send cover 
letter tomorrow

all information of version control is included in cover letter.

On 20. 4. 20. ìì 10:32, Hyunki Koo wrote:
> Support 32-bit access for the TX/RX hold registers UTXH and URXH.
>
> This is required for some newer SoCs.
>
> Signed-off-by: Hyunki Koo <hyunki00.koo@xxxxxxxxxxx>
> ---
>   drivers/tty/serial/samsung_tty.c | 62 ++++++++++++++++++++++++++++++++++++----
>   1 file changed, 57 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/tty/serial/samsung_tty.c b/drivers/tty/serial/samsung_tty.c
> index 326b0164609c..bdf1d4d12cb1 100644
> --- a/drivers/tty/serial/samsung_tty.c
> +++ b/drivers/tty/serial/samsung_tty.c
> @@ -154,12 +154,47 @@ struct s3c24xx_uart_port {
>   #define portaddrl(port, reg) \
>   	((unsigned long *)(unsigned long)((port)->membase + (reg)))
>   
> -#define rd_reg(port, reg) (readb_relaxed(portaddr(port, reg)))
> +static u32 rd_reg(struct uart_port *port, u32 reg)
> +{
> +	switch (port->iotype) {
> +	case UPIO_MEM:
> +		return readb_relaxed(portaddr(port, reg));
> +	case UPIO_MEM32:
> +		return readl_relaxed(portaddr(port, reg));
> +	default:
> +		return 0;
> +	}
> +	return 0;
> +}
> +
>   #define rd_regl(port, reg) (readl_relaxed(portaddr(port, reg)))
>   
> -#define wr_reg(port, reg, val) writeb_relaxed(val, portaddr(port, reg))
> +static void wr_reg(struct uart_port *port, u32 reg, u32 val)
> +{
> +	switch (port->iotype) {
> +	case UPIO_MEM:
> +		writeb_relaxed(val, portaddr(port, reg));
> +		break;
> +	case UPIO_MEM32:
> +		writel_relaxed(val, portaddr(port, reg));
> +		break;
> +	}
> +}
> +
>   #define wr_regl(port, reg, val) writel_relaxed(val, portaddr(port, reg))
>   
> +static void wr_reg_barrier(struct uart_port *port, u32 reg, u32 val)
> +{
> +	switch (port->iotype) {
> +	case UPIO_MEM:
> +		writeb(val, portaddr(port, reg));
> +		break;
> +	case UPIO_MEM32:
> +		writel(val, portaddr(port, reg));
> +		break;
> +	}
> +}
> +
>   /* Byte-order aware bit setting/clearing functions. */
>   
>   static inline void s3c24xx_set_bit(struct uart_port *port, int idx,
> @@ -1974,7 +2009,7 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
>   	struct device_node *np = pdev->dev.of_node;
>   	struct s3c24xx_uart_port *ourport;
>   	int index = probe_index;
> -	int ret;
> +	int ret, prop = 0;
>   
>   	if (np) {
>   		ret = of_alias_get_id(np, "serial");
> @@ -2000,10 +2035,27 @@ static int s3c24xx_serial_probe(struct platform_device *pdev)
>   			dev_get_platdata(&pdev->dev) :
>   			ourport->drv_data->def_cfg;
>   
> -	if (np)
> +	if (np) {
>   		of_property_read_u32(np,
>   			"samsung,uart-fifosize", &ourport->port.fifosize);
>   
> +		if (of_property_read_u32(np, "reg-io-width", &prop) == 0) {
> +			switch (prop) {
> +			case 1:
> +				ourport->port.iotype = UPIO_MEM;
> +				break;
> +			case 4:
> +				ourport->port.iotype = UPIO_MEM32;
> +				break;
> +			default:
> +				dev_warn(&pdev->dev, "unsupported reg-io-width (%d)\n",
> +						prop);
> +				ret = -EINVAL;
> +				break;
> +			}
> +		}
> +	}
> +
>   	if (ourport->drv_data->fifosize[index])
>   		ourport->port.fifosize = ourport->drv_data->fifosize[index];
>   	else if (ourport->info->fifosize)
> @@ -2612,7 +2664,7 @@ static void samsung_early_putc(struct uart_port *port, int c)
>   	else
>   		samsung_early_busyuart(port);
>   
> -	writeb(c, port->membase + S3C2410_UTXH);
> +	wr_reg_barrier(port, S3C2410_UTXH, c);
>   }
>   
>   static void samsung_early_write(struct console *con, const char *s,