Re: [PATCH v2 2/2] i2c: i2c-stm32f7: allows for any bus frequency
From: Alain Volmat
Date: Mon Apr 20 2020 - 11:00:50 EST
Hi Wolfram,
On Wed, Apr 15, 2020 at 01:09:16PM +0200, Wolfram Sang wrote:
> Hi Alain,
>
> On Thu, Mar 26, 2020 at 01:44:21PM +0100, Alain Volmat wrote:
> > Do not limitate to the 3 (100KHz, 400KHz, 1MHz) bus frequency but
> > instead allows any frequency (if it matches timing requirements).
> > Depending on the requested frequency, use the spec data from either
> > Standard, Fast or Fast Plus mode.
> >
> > Hardcoding of min/max bus frequencies is removed and is instead computed.
> >
> > The driver do not use anymore speed identifier but instead handle
> > directly the frequency and figure out the spec data (necessary
> > for the computation of the timing register) based on the frequency.
>
> Useful improvement!
>
> > +static struct stm32f7_i2c_spec *get_specs(u32 rate)
>
> This is quite a generic namespace. Can we prefix stm32f7_<sth> here?
Done in v3
>
> > + if (rate <= i2c_specs[i].rate)
> > + return &i2c_specs[i];
>
> Same for i2c_specs here?
Done in v3
>
> > +static u32 get_lower_rate(u32 rate)
>
> Here, too.
Done in v3
>
> Rest looks good to me.
>
> Regards,
>
> Wolfram
>
Regards,
Alain