[PATCH 1/4] usb: dwc2: gadget: move gadget resume after the core is in L0 state

[Fabrice Gasnier]

When the remote wakeup interrupt is triggered, lx_state is resumed from L2
to L0 state. But when the gadget resume is called, lx_state is still L2.
This prevents the resume callback to queue any request. Any attempt
to queue a request from resume callback will result in:
- "submit request only in active state" debug message to be issued
- dwc2_hsotg_ep_queue() returns -EAGAIN

Move the call to resume gadget after the core is put in DWC2_L0 state.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
---
 drivers/usb/dwc2/core_intr.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c
index 876ff31..b8ebda5 100644
--- a/drivers/usb/dwc2/core_intr.c
+++ b/drivers/usb/dwc2/core_intr.c
@@ -404,9 +404,11 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 	}
 
 	if (dwc2_is_device_mode(hsotg)) {
+		enum dwc2_lx_state lx_state = hsotg->lx_state;
+
 		dev_dbg(hsotg->dev, "DSTS=0x%0x\n",
 			dwc2_readl(hsotg, DSTS));
-		if (hsotg->lx_state == DWC2_L2) {
+		if (lx_state == DWC2_L2) {
 			u32 dctl = dwc2_readl(hsotg, DCTL);
 
 			/* Clear Remote Wakeup Signaling */
@@ -415,11 +417,13 @@ static void dwc2_handle_wakeup_detected_intr(struct dwc2_hsotg *hsotg)
 			ret = dwc2_exit_partial_power_down(hsotg, true);
 			if (ret && (ret != -ENOTSUPP))
 				dev_err(hsotg->dev, "exit power_down failed\n");
-
-			call_gadget(hsotg, resume);
 		}
 		/* Change to L0 state */
 		hsotg->lx_state = DWC2_L0;
+
+		/* Gadget may queue new requests upon resume to L0 state */
+		if (lx_state == DWC2_L2)
+			call_gadget(hsotg, resume);
 	} else {
 		if (hsotg->params.power_down)
 			return;
-- 
2.7.4