Re: [linux-sunxi] [RFC PATCH 4/4] pwm: sun4i: Delay after writing the period
From: Samuel Holland
Date: Tue Apr 21 2020 - 23:43:43 EST
Hello Pascal,
On 3/17/20 10:59 AM, Pascal Roeleven wrote:
> When disabling, ensure the period write is complete before continuing.
> This fixes an issue on some devices when the write isn't complete before
> the panel is turned off but the clock gate is still on.
>
> Signed-off-by: Pascal Roeleven <dev@xxxxxxxxxxxxxxxxx>
> ---
> drivers/pwm/pwm-sun4i.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
> index a11d00f96..75250fd4c 100644
> --- a/drivers/pwm/pwm-sun4i.c
> +++ b/drivers/pwm/pwm-sun4i.c
> @@ -299,6 +299,10 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm));
> next_period = jiffies + usecs_to_jiffies(cstate.period / 1000 + 1);
>
> + /* When disabling, make sure the period register is written first */
> + if (!state->enabled && cstate.enabled)
> + sun4i_pwm_wait(next_period);
> +
It is not visible from the context of this patch, but this call to
sun4i_pwm_wait() ends up calling msleep() inside a spinlock, which isn't
allowed. The spinlock should probably be converted to a mutex, considering that
sun4i_pwm_apply() already sleeps and takes mutexes.
Regards,
Samuel
> if (state->polarity != PWM_POLARITY_NORMAL)
> ctrl &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm);
> else
> @@ -320,6 +324,7 @@ static int sun4i_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
> return 0;
>
> /* We need a full period to elapse before disabling the channel. */
> + next_period = jiffies + usecs_to_jiffies(cstate.period / 1000 + 1);
> sun4i_pwm_wait(next_period);
>
> spin_lock(&sun4i_pwm->ctrl_lock);
>