Re: [PATCH v6 00/12] ARM/MIPS: DTS: add child nodes describing the PVRSGX GPU present in some OMAP SoC and JZ4780 (and many more)
From: H. Nikolaus Schaller
Date: Wed Apr 22 2020 - 03:11:13 EST
Hi Maxime,
> Am 22.04.2020 um 08:58 schrieb Maxime Ripard <maxime@xxxxxxxxxx>:
>
> On Tue, Apr 21, 2020 at 07:29:32PM +0200, H. Nikolaus Schaller wrote:
>>
>>> Am 21.04.2020 um 16:15 schrieb Tony Lindgren <tony@xxxxxxxxxxx>:
>>>
>>> * Maxime Ripard <maxime@xxxxxxxxxx> [200421 11:22]:
>>>> On Tue, Apr 21, 2020 at 11:57:33AM +0200, Philipp Rossak wrote:
>>>>> I had a look on genpd and I'm not really sure if that fits.
>>>>>
>>>>> It is basically some bit that verify that the clocks should be enabled or
>>>>> disabled.
>>>>
>>>> No, it can do much more than that. It's a framework to control the SoCs power
>>>> domains, so clocks might be a part of it, but most of the time it's going to be
>>>> about powering up a particular device.
>>>
>>> Note that on omaps there are actually SoC module specific registers.
>>
>> Ah, I see. This is of course a difference that the TI glue logic has
>> its own registers in the same address range as the sgx and this can't
>> be easily handled by a common sgx driver.
>>
>> This indeed seems to be unique with omap.
>>
>>> And there can be multiple devices within a single target module on
>>> omaps. So the extra dts node and device is justified there.
>>>
>>> For other SoCs, the SGX clocks are probably best handled directly
>>> in pvr-drv.c PM runtime functions unless a custom hardware wrapper
>>> with SoC specific registers exists.
>>
>> That is why we need to evaluate what the better strategy is.
>>
>> So we have
>> a) omap which has a custom wrapper around the sgx
>> b) others without, i.e. an empty (or pass-through) wrapper
>>
>> Which one do we make the "standard" and which one the "exception"?
>> What are good reasons for either one?
>>
>>
>> I am currently in strong favour of a) being standard because it
>> makes the pvr-drv.c simpler and really generic (independent of
>> wrapping into any SoC).
>>
>> This will likely avoid problems if we find more SoC with yet another
>> scheme how the SGX clocks are wrapped.
>>
>> It also allows to handle different number of clocks (A31 seems to
>> need 4, Samsung, A83 and JZ4780 one) without changing the sgx bindings
>> or making big lists of conditionals. This variance would be handled
>> outside the sgx core bindings and driver.
>
> I disagree. Every other GPU binding and driver is handling that just fine, and
> the SGX is not special in any case here.
Can you please better explain this? With example or a description
or a proposal?
I simply do not have your experience with "every other GPU" as you have.
And I admit that I can't read from your statement what we should do
to bring this topic forward.
So please make a proposal how it should be in your view.
BR and thanks,
Nikolaus