[PATCH] net: phy: Use IS_ERR() to check and simplify code

[Tang Bin]

Use IS_ERR() and PTR_ERR() instead of PTR_ZRR_OR_ZERO()
to simplify code, avoid redundant paramenter definitions
and judgements.

Signed-off-by: Zhang Shengju <zhangshengju@xxxxxxxxxxxxxxxxxxxx>
Signed-off-by: Tang Bin <tangbin@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/net/phy/mdio_bus.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 9bb9f37f2..b1114f204 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -42,14 +42,11 @@
 
 static int mdiobus_register_gpiod(struct mdio_device *mdiodev)
 {
-	int error;
-
 	/* Deassert the optional reset signal */
 	mdiodev->reset_gpio = gpiod_get_optional(&mdiodev->dev,
 						 "reset", GPIOD_OUT_LOW);
-	error = PTR_ERR_OR_ZERO(mdiodev->reset_gpio);
-	if (error)
-		return error;
+	if (IS_ERR(mdiodev->reset_gpio))
+		return PTR_ERR(mdiodev->reset_gpio);
 
 	if (mdiodev->reset_gpio)
 		gpiod_set_consumer_name(mdiodev->reset_gpio, "PHY reset");
-- 
2.20.1.windows.1