Re: [PATCH v2] xhci: Set port link to RxDetect if port is not enabled after resume
From: Kai-Heng Feng
Date: Wed Apr 22 2020 - 09:23:47 EST
> On Mar 26, 2020, at 19:33, Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> wrote:
>
> Hi Mathias,
>
>> On Mar 11, 2020, at 12:04, Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx> wrote:
>>
>> On Dell TB16, Realtek USB ethernet (r8152) connects to an SMSC hub which
>> then connects to ASMedia xHCI's root hub:
>>
>> /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M
>> |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/7p, 5000M
>> |__ Port 2: Dev 3, If 0, Class=Vendor Specific Class, Driver=r8152, 5000M
>>
>> Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
>> Bus 004 Device 002: ID 0424:5537 Standard Microsystems Corp. USB5537B
>> Bus 004 Device 003: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit Ethernet Adapter
>>
>> The port is disabled after resume:
>> xhci_hcd 0000:3f:00.0: Get port status 4-1 read: 0x280, return 0x280
>>
>> According to xHCI 4.19.1.2.1, we should set link to RxDetect to transit
>> it from disabled state to disconnected state, which allows the port to
>> be set to U0 and completes the resume process.
>>
>> My own test shows port can still resume when it's not enabled, as long
>> as its link is in U states. So constrain the new logic only when link is
>> not in any U state.
>>
>> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>
>
> Do you think this is a proper fix?
Another gentle ping...
>
> Kai-Heng
>
>> ---
>> drivers/usb/host/xhci-hub.c | 8 ++++++++
>> 1 file changed, 8 insertions(+)
>>
>> diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
>> index a9c87eb8951e..263f9a9237a1 100644
>> --- a/drivers/usb/host/xhci-hub.c
>> +++ b/drivers/usb/host/xhci-hub.c
>> @@ -1776,6 +1776,14 @@ int xhci_bus_resume(struct usb_hcd *hcd)
>> clear_bit(port_index, &bus_state->bus_suspended);
>> continue;
>> }
>> +
>> + /* 4.19.1.2.1 */
>> + if (!(portsc & PORT_PE) && (portsc & PORT_PLS_MASK) > XDEV_U3) {
>> + portsc = xhci_port_state_to_neutral(portsc);
>> + portsc &= ~PORT_PLS_MASK;
>> + portsc |= PORT_LINK_STROBE | XDEV_RXDETECT;
>> + }
>> +
>> /* resume if we suspended the link, and it is still suspended */
>> if (test_bit(port_index, &bus_state->bus_suspended))
>> switch (portsc & PORT_PLS_MASK) {
>> --
>> 2.17.1
>>
>