Re: [v4 PATCH 2/3] RISC-V: Add PE/COFF header for EFI stub

From: Atish Patra
Date: Wed Apr 22 2020 - 13:44:14 EST

Next message: Christoph Hellwig: "Re: [PATCH v2 5/5] loop: Add LOOP_SET_FD_AND_STATUS ioctl"
Previous message: Will Deacon: "Re: [PATCH v12 02/12] scs: add accounting"
In reply to: Ard Biesheuvel: "Re: [v4 PATCH 2/3] RISC-V: Add PE/COFF header for EFI stub"
Next in thread: Palmer Dabbelt: "Re: [v4 PATCH 2/3] RISC-V: Add PE/COFF header for EFI stub"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, 2020-04-21 at 19:51 +0200, Ard Biesheuvel wrote:
> Hi Atish,
>
> One thing I forgot to check, below:
>
> On Tue, 21 Apr 2020 at 05:34, Atish Patra <atish.patra@xxxxxxx>
> wrote:
> > Linux kernel Image can appear as an EFI application With
> > appropriate
> > PE/COFF header fields in the beginning of the Image header. An EFI
> > application loader can directly load a Linux kernel Image and an
> > EFI
> > stub residing in kernel can boot Linux kernel directly.
> >
> > Add the necessary PE/COFF header.
> >
> > Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
> > ---
> > arch/riscv/include/asm/sections.h | 13 ++++
> > arch/riscv/kernel/Makefile | 4 ++
> > arch/riscv/kernel/efi-header.S | 99
> > +++++++++++++++++++++++++++++++
> > arch/riscv/kernel/head.S | 16 +++++
> > arch/riscv/kernel/image-vars.h | 53 +++++++++++++++++
> > arch/riscv/kernel/vmlinux.lds.S | 20 ++++++-
> > 6 files changed, 203 insertions(+), 2 deletions(-)
> > create mode 100644 arch/riscv/include/asm/sections.h
> > create mode 100644 arch/riscv/kernel/efi-header.S
> > create mode 100644 arch/riscv/kernel/image-vars.h
> >
> > diff --git a/arch/riscv/include/asm/sections.h
> > b/arch/riscv/include/asm/sections.h
> > new file mode 100644
> > index 000000000000..3a9971b1210f
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/sections.h
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2020 Western Digital Corporation or its
> > affiliates.
> > + */
> > +#ifndef __ASM_SECTIONS_H
> > +#define __ASM_SECTIONS_H
> > +
> > +#include <asm-generic/sections.h>
> > +
> > +extern char _start[];
> > +extern char _start_kernel[];
> > +
> > +#endif /* __ASM_SECTIONS_H */
> > diff --git a/arch/riscv/kernel/Makefile
> > b/arch/riscv/kernel/Makefile
> > index 86c83081044f..86ca755f8a9f 100644
> > --- a/arch/riscv/kernel/Makefile
> > +++ b/arch/riscv/kernel/Makefile
> > @@ -32,6 +32,10 @@ obj-y += patch.o
> > obj-$(CONFIG_MMU) += vdso.o vdso/
> >
> > obj-$(CONFIG_RISCV_M_MODE) += clint.o traps_misaligned.o
> > +OBJCOPYFLAGS := --prefix-symbols=__efistub_
> > +$(obj)/%.stub.o: $(obj)/%.o FORCE
> > + $(call if_changed,objcopy)
> > +
> > obj-$(CONFIG_FPU) += fpu.o
> > obj-$(CONFIG_SMP) += smpboot.o
> > obj-$(CONFIG_SMP) += smp.o
> > diff --git a/arch/riscv/kernel/efi-header.S
> > b/arch/riscv/kernel/efi-header.S
> > new file mode 100644
> > index 000000000000..69dde8268527
> > --- /dev/null
> > +++ b/arch/riscv/kernel/efi-header.S
> > @@ -0,0 +1,99 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2020 Western Digital Corporation or its
> > affiliates.
> > + * Adapted from arch/arm64/kernel/efi-header.S
> > + */
> > +
> > +#include <linux/pe.h>
> > +#include <linux/sizes.h>
> > +
> > + .macro __EFI_PE_HEADER
> > + .long PE_MAGIC
> > +coff_header:
> > + .short IMAGE_FILE_MACHINE_RISCV64 // Machine
> > + .short section_count //
> > NumberOfSections
> > + .long 0 //
> > TimeDateStamp
> > + .long 0 //
> > PointerToSymbolTable
> > + .long 0 //
> > NumberOfSymbols
> > + .short section_table - optional_header //
> > SizeOfOptionalHeader
> > + .short IMAGE_FILE_DEBUG_STRIPPED | \
> > + IMAGE_FILE_EXECUTABLE_IMAGE | \
> > + IMAGE_FILE_LINE_NUMS_STRIPPED //
> > Characteristics
> > +
> > +optional_header:
> > + .short PE_OPT_MAGIC_PE32PLUS // PE32+
> > format
> > + .byte 0x02 //
> > MajorLinkerVersion
> > + .byte 0x14 //
> > MinorLinkerVersion
> > + .long __text_end - efi_header_end //
> > SizeOfCode
> > + .long _end - __text_end //
> > SizeOfInitializedData
> > + .long 0 //
> > SizeOfUninitializedData
> > + .long __efistub_efi_entry - _start //
> > AddressOfEntryPoint
> > + .long efi_header_end - _start //
> > BaseOfCode
> > +
> > +extra_header_fields:
> > + .quad 0 //
> > ImageBase
> > + .long SZ_4K //
> > SectionAlignment
>
> Here you set the section alignment to 4 KB ...
>
> > + .long PECOFF_FILE_ALIGNMENT //
> > FileAlignment
> > + .short 0 //
> > MajorOperatingSystemVersion
> > + .short 0 //
> > MinorOperatingSystemVersion
> > + .short LINUX_EFISTUB_MAJOR_VERSION //
> > MajorImageVersion
> > + .short LINUX_EFISTUB_MINOR_VERSION //
> > MinorImageVersion
> > + .short 0 //
> > MajorSubsystemVersion
> > + .short 0 //
> > MinorSubsystemVersion
> > + .long 0 //
> > Win32VersionValue
> > +
> > + .long _end - _start //
> > SizeOfImage
> > +
> > + // Everything before the kernel image is considered part of
> > the header
> > + .long efi_header_end - _start //
> > SizeOfHeaders
> > + .long 0 // CheckSum
> > + .short IMAGE_SUBSYSTEM_EFI_APPLICATION //
> > Subsystem
> > + .short 0 //
> > DllCharacteristics
> > + .quad 0 //
> > SizeOfStackReserve
> > + .quad 0 //
> > SizeOfStackCommit
> > + .quad 0 //
> > SizeOfHeapReserve
> > + .quad 0 //
> > SizeOfHeapCommit
> > + .long 0 //
> > LoaderFlags
> > + .long (section_table - .) / 8 //
> > NumberOfRvaAndSizes
> > +
> > + .quad 0 //
> > ExportTable
> > + .quad 0 //
> > ImportTable
> > + .quad 0 //
> > ResourceTable
> > + .quad 0 //
> > ExceptionTable
> > + .quad 0 //
> > CertificationTable
> > + .quad 0 //
> > BaseRelocationTable
> > +
> > + // Section table
> > +section_table:
> > + .ascii ".text\0\0\0"
> > + .long __text_end - efi_header_end //
> > VirtualSize
> > + .long efi_header_end - _start //
> > VirtualAddress
>
> ... and here you define the address of the first section, which
> should
> be aligned to section alignment of 4 KB
>
> > + .long __text_end - efi_header_end //
> > SizeOfRawData
> > + .long efi_header_end - _start //
> > PointerToRawData
> > +
> > + .long 0 //
> > PointerToRelocations
> > + .long 0 //
> > PointerToLineNumbers
> > + .short 0 //
> > NumberOfRelocations
> > + .short 0 //
> > NumberOfLineNumbers
> > + .long IMAGE_SCN_CNT_CODE | \
> > + IMAGE_SCN_MEM_READ | \
> > + IMAGE_SCN_MEM_EXECUTE //
> > Characteristics
> > +
> > + .ascii ".data\0\0\0"
> > + .long __data_virt_size //
> > VirtualSize
> > + .long __text_end - _start //
> > VirtualAddress
> > + .long __data_raw_size //
> > SizeOfRawData
> > + .long __text_end - _start //
> > PointerToRawData
> > +
> > + .long 0 //
> > PointerToRelocations
> > + .long 0 //
> > PointerToLineNumbers
> > + .short 0 //
> > NumberOfRelocations
> > + .short 0 //
> > NumberOfLineNumbers
> > + .long IMAGE_SCN_CNT_INITIALIZED_DATA | \
> > + IMAGE_SCN_MEM_READ | \
> > + IMAGE_SCN_MEM_WRITE //
> > Characteristics
> > +
> > + .set section_count, (. - section_table) / 40
> > +
> > +efi_header_end:
>
> ... so you will need to put an .p2align 12 here to ensure that
> efi_header_end appears at 4 KB boundary.
>
> Similarly, you will have to align the symbols __text_end and
> __data_virt_size in the linker scripts to make them round multiples
> of
> 4 KB.
>
>

Sure. I will fix the alignment.

>
> > + .endm
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index 98a406474e7d..ddd613dac9d6 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -13,6 +13,7 @@
> > #include <asm/csr.h>
> > #include <asm/hwcap.h>
> > #include <asm/image.h>
> > +#include "efi-header.S"
> >
> > __HEAD
> > ENTRY(_start)
> > @@ -22,10 +23,18 @@ ENTRY(_start)
> > * Do not modify it without modifying the structure and all
> > bootloaders
> > * that expects this header format!!
> > */
> > +#ifdef CONFIG_EFI
> > + /*
> > + * This instruction decodes to "MZ" ASCII required by UEFI.
> > + */
> > + li s4,-13
> > + j _start_kernel
> > +#else
> > /* jump to start kernel */
> > j _start_kernel
> > /* reserved */
> > .word 0
> > +#endif
> > .balign 8
> > #if __riscv_xlen == 64
> > /* Image load offset(2MB) from start of RAM */
> > @@ -43,7 +52,14 @@ ENTRY(_start)
> > .ascii RISCV_IMAGE_MAGIC
> > .balign 4
> > .ascii RISCV_IMAGE_MAGIC2
> > +#ifdef CONFIG_EFI
> > + .word pe_head_start - _start
> > +pe_head_start:
> > +
> > + __EFI_PE_HEADER
> > +#else
> > .word 0
> > +#endif
> >
> > .align 2
> > #ifdef CONFIG_MMU
> > diff --git a/arch/riscv/kernel/image-vars.h
> > b/arch/riscv/kernel/image-vars.h
> > new file mode 100644
> > index 000000000000..bd8b764f0ad9
> > --- /dev/null
> > +++ b/arch/riscv/kernel/image-vars.h
> > @@ -0,0 +1,53 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2020 Western Digital Corporation or its
> > affiliates.
> > + * Linker script variables to be set after section resolution, as
> > + * ld.lld does not like variables assigned before SECTIONS is
> > processed.
> > + * Based on arch/arm64/kerne/image-vars.h
> > + */
> > +#ifndef __RISCV_KERNEL_IMAGE_VARS_H
> > +#define __RISCV_KERNEL_IMAGE_VARS_H
> > +
> > +#ifndef LINKER_SCRIPT
> > +#error This file should only be included in vmlinux.lds.S
> > +#endif
> > +
> > +#ifdef CONFIG_EFI
> > +
> > +__efistub_stext_offset = _start_kernel - _start;
> > +
> > +/*
> > + * The EFI stub has its own symbol namespace prefixed by
> > __efistub_, to
> > + * isolate it from the kernel proper. The following symbols are
> > legally
> > + * accessed by the stub, so provide some aliases to make them
> > accessible.
> > + * Only include data symbols here, or text symbols of functions
> > that are
> > + * guaranteed to be safe when executed at another offset than they
> > were
> > + * linked at. The routines below are all implemented in assembler
> > in a
> > + * position independent manner
> > + */
> > +__efistub_memcmp = memcmp;
> > +__efistub_memchr = memchr;
> > +__efistub_memcpy = memcpy;
> > +__efistub_memmove = memmove;
> > +__efistub_memset = memset;
> > +__efistub_strlen = strlen;
> > +__efistub_strnlen = strnlen;
> > +__efistub_strcmp = strcmp;
> > +__efistub_strncmp = strncmp;
> > +__efistub_strrchr = strrchr;
> > +
> > +#ifdef CONFIG_KASAN
> > +__efistub___memcpy = memcpy;
> > +__efistub___memmove = memmove;
> > +__efistub___memset = memset;
> > +#endif
> > +
> > +__efistub__start = _start;
> > +__efistub__start_kernel = _start_kernel;
> > +__efistub__end = _end;
> > +__efistub__edata = _edata;
> > +__efistub_screen_info = screen_info;
> > +
> > +#endif
> > +
> > +#endif /* __RISCV_KERNEL_IMAGE_VARS_H */
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S
> > b/arch/riscv/kernel/vmlinux.lds.S
> > index 0339b6bbe11a..20ebf7e8c215 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -10,6 +10,7 @@
> > #include <asm/cache.h>
> > #include <asm/thread_info.h>
> > #include <asm/set_memory.h>
> > +#include "image-vars.h"
> >
> > #include <linux/sizes.h>
> > OUTPUT_ARCH(riscv)
> > @@ -17,6 +18,14 @@ ENTRY(_start)
> >
> > jiffies = jiffies_64;
> >
> > +PECOFF_FILE_ALIGNMENT = 0x200;
> > +#ifdef CONFIG_EFI
> > +#define PECOFF_EDATA_PADDING \
> > + .pecoff_edata_padding : { BYTE(0); . =
> > ALIGN(PECOFF_FILE_ALIGNMENT); }
> > +#else
> > +#define PECOFF_EDATA_PADDING
> > +#endif
> > +
> > SECTIONS
> > {
> > /* Beginning of code and text segment */
> > @@ -62,6 +71,8 @@ SECTIONS
> > _etext = .;
> > }
> >
> > + __text_end = .;
> > +
> > /* Start of data section */
> > _sdata = .;
> > RO_DATA(SECTION_ALIGN)
> > @@ -78,9 +89,12 @@ SECTIONS
> > .sdata : {
> > __global_pointer$ = . + 0x800;
> > *(.sdata*)
> > - /* End of data section */
> > - _edata = .;
> > }
> > + PECOFF_EDATA_PADDING
> > + __data_raw_size = ABSOLUTE(. - __text_end);
> > +
> > + /* End of data section */
> > + _edata = .;
> >
> > BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> >
> > @@ -88,6 +102,8 @@ SECTIONS
> > *(.rel.dyn*)
> > }
> >
> > + __data_virt_size = ABSOLUTE(. - __text_end);
> > +
> > _end = .;
> >
> > STABS_DEBUG
> > --
> > 2.24.0
> >

--
Regards,
Atish

Next message: Christoph Hellwig: "Re: [PATCH v2 5/5] loop: Add LOOP_SET_FD_AND_STATUS ioctl"
Previous message: Will Deacon: "Re: [PATCH v12 02/12] scs: add accounting"
In reply to: Ard Biesheuvel: "Re: [v4 PATCH 2/3] RISC-V: Add PE/COFF header for EFI stub"
Next in thread: Palmer Dabbelt: "Re: [v4 PATCH 2/3] RISC-V: Add PE/COFF header for EFI stub"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]